For my car, I am buying Chrome. Seems like everyone wants black or dark silver. Since my car is Sterling Gray, I prefer lighter color wheels on it, and chrome is easy to keep clean.
SVE Drag Wheels are back!
- Thread starter 87hatchy
- Start date
For my car, I am buying Chrome. Seems like everyone wants black or dark silver. Since my car is Sterling Gray, I prefer lighter color wheels on it, and chrome is easy to keep clean.
Yup, light comes on after about 40 or 50 miles. It doesn't hurt anything though-you can still disable advancetrak when at the track etc.
Here's another shot of mine at the dragstrip for any grabber blue fans.
those look amazing. I'm considering a set of 15" for my '05 GT and wanted to wait to see how much (if at all) they stick out from the fender; doesn't look like much.
How much does the 15" front wheel/tire combo weigh with the ET fronts?
Last edited:
Yup, light comes on after about 40 or 50 miles. It doesn't hurt anything though-you can still disable advancetrak when at the track etc.
Here's another shot of mine at the dragstrip for any grabber blue fans.
I went with black
Couple more photo's of the DIB & dark stainless as requested
Looks damn good guys!
Thank you
Front SVE 15" wheels weight 12 lbs and the tires are 14 or 15 so about 26 or 27lbs total.
thanks!
I was actually a little high in my estimate. I found the card I wrote down the exact weights.. Front 15x4 with 26" mickey bias ply fronts: 23lbs Rear 15x10 with 28x10.5x15S Mickey et drags: 39.6lbs
Mine car feels faster after installing a set of 17" x 4.5 front and 15x10 rear. Traction are not a problem anymore. The front end kinda lift up when i floor it. I have chrome. Looks reaLLY good and easy to clean. Best mods i had done so far. Latemodelrestoration are really good . The setup used stock lug nuts.
Very convenience.
Very convenience.
The worst part is cutting the metal on the rear end in order to fit that 15x10 wheels. Took like 3 hour to cut them off and putting the sway bar relocation on there. I should have order the 17" rear wheels.
4" Grinder
Flame fly everywhere. I dont have mask or anything on
I use the same grinder that i used to cut mine coil springs with.
thanks!
You could have went with 15x8 rear wheels and not had to relocate the sway bar.
One thing I DO notice with my rear swaybar relocated is when accelerating and hitting the brakes hard, my rear end ways to sway back and forth a little. Almost like its on slicks. And this is with the OEM 20" SVTPP wheel and 555r's
^^^I just like the wider 15x10 in case i went to 325/50/15 in the future
15x8 is no longer available in the SVE wheels...I just looked the other day and it was 15x10 only.
Users who are viewing this thread
