Summer Mods and Dyno Tune Results

[fastgt110]

Just got some new goodies installed on the cobra. Put on some chrome 03 cobra rims with the nitto 275s in the front and the 315 nitto 555rs in the back. Put in the SLP line lock kit which was a pita to install but its defenitely worth it, very high quality kit too. And to top it all off i put on the BF 2.76 pulley & idler kit and a got a dyno tune from JDM Engineering. Car put down 466 hp and 489 ft-lbs of torque and Jim said the car will probably be around 480hp in colder weather (pretty humid day). The car defenitely moves alot faster now and couldnt be more happier, big thanks to JDM. Let me know what you guys think :burnout:

 

[96stanggt]

Car looks great, and those are awesome numbers for this summer heat! Congrats!

 

[2001gunmetalgt]

Sweet, I am about to swap from my 2.93 to a 2.76. I got the SCT BA 2800 since my stock MAF was close to pegging with the 2.93. What belt did you go with on the 2.76? Yes I have all the idlers/snub idler like you. Thanks

 

[1967eleanor]

i have a 2.76, a jlt, catted x ,and a slp catback and i put down 466/533 i wonder why my torque was so much more?

edit, this was on stock ford plugs

 

[fastgt110]

with the 2.76 pulley if you get the three 100mm idlers and the 93mm snub idler you can use the stock belt =)

 

[TrickStang37]

how much timing/octane are you running? were these SAE, STD or uncorrected numbers?

15.2 is alot of boost for just the upper only.

 

[T-Pain808]

Either way nice number in the summer and a upper only. But you gotta drop that ca,r or I got to ban you!

 

[03dsgcobranc]

i have a 2.76, a jlt, catted x ,and a slp catback and i put down 466/533 i wonder why my torque was so much more?

edit, this was on stock ford plugs

how did you make 533 tq with just an upper? who tuned your car?

 

[unit213]

i have a 2.76, a jlt, catted x ,and a slp catback and i put down 466/533 i wonder why my torque was so much more?

That 533rwtq number seems very squirrley to me.
I don't believe that's accurate.

fastht110,

Very nice looking engine bay and nice power to boot! Congrats.
I know it feels like a totally different car now. :rockon:

 

[fastgt110]

Thanks :rockon: Ill let you guys know what i run at the track when i hopefully take it down there this friday.

 

[VAMPIR3]

Great numbers:rockon:


Yeah that 533 TQ is nuts man..... If my dyno graph said that I would actually probably be more unsure then happy because I wouldn't believe it and know something had to be wrong.

 

[SVTkel]

My 2.93 upper + 4 lb lower + port made 535 rwtq. At that power I could roast my Nittos in second gear. Blows my mind that a 2.76 upper could pick up that much tq.

 

[SVTkel]

To the OP - good results

 

[tranceformer]

Nice numbers, Matt!

Now take it to the track and put the power to the ground!

 

[T-Pain808]

Did you drop it yet? :dancenana: