Stock Pulley, No Port, Full Weight - 12.3 @ 113

Logan2003Cobra

Active Member
Established Member
Joined
May 29, 2004
Messages
757
Location
TX
Well I FINALLY put drag radials on the car and ran a couple of 12.3's at 113... I also ran a 12.4 @ 111. Previous best were a couple of 12.6's at 111 and ALOT of 12.7's at 113.

The best 60' I could get was 1.9 i.e. the stock clutch at 38K miles didn't like all the traction (could smell it after every run).

The best thing about one of the 12.3 runs was who I raced.

I raced against an 03 Z06 (DR's, Veraram) who ran a 12.7... He said he was catching me on the top end but my 1/8th mile read 8.0 and his read 8.2 (took me 4.3 to cover the last 1/8th and took him 4.5 sooooo). Another great thing about this race was that this was the same guy who beat me in his 04 Z06 right after I bought my car, he beat my 13.1 with his 12.8. Three years and a few mods later I get revenge. :pepper:
 
Last edited:

P49Y-CY

fomocomofo
Established Member
Joined
Jun 21, 2003
Messages
11,228
Location
southwest
very nice! good driving

i would i could make a run in some good air/elevation and see if i could improve a little

what pressure in the drag radials for that 1.9?
 

Logan2003Cobra

Active Member
Established Member
Joined
May 29, 2004
Messages
757
Location
TX
VERTIBLEMENACE said:
what pressure in the drag radials for that 1.9?

22-23 psi gave me pretty consistent 1.9's... I dropped the pressure to 18, let the car cool for about an hour, launched at about 4200 with just a hint of wheel spin and got a 1.8... but missed a gear so the time was slower. :fm:

I'm sure I cold go 1.7 with more practice, but I'll just have to wait till next year. :(
 

Users who are viewing this thread



Top