Quick A/F Question?

wlg101190

New Member
Established Member
Joined
Apr 7, 2007
Messages
1,483
Location
Gulfport, MS
I have just a basic upper / lower pulied Cobra, with a canned tune from Amazon on my XCal 3. Since I am not looking to get a dyno tune at the moment, I was wandering if it would be ok to mess with the a/f on my XCal 3 since I believe it is running a little rich. Under WOT, what would be a safe, but pretty aggressive a/f ratio? Thanks!
 

wlg101190

New Member
Established Member
Joined
Apr 7, 2007
Messages
1,483
Location
Gulfport, MS
Heh, I was actually going to use the one on the ODO gauge that the computer reads or whatever. Is this one accurate at all?
 

NITROS COBRA

New Member
Established Member
Joined
Mar 26, 2007
Messages
868
Location
SAN FERNANDO VALLEY
I would let the pros do the fuel and timing, not that you are uncapable but if you lean it to much= broken, wait until you get it dyno tuned one day, better to run too fat than too lean.
 

Users who are viewing this thread



Top