Question about nitrous nozzle placement.

[Slobanator]

I have a zex wet nitrous kit and at pretty much the last steps.

I have a question about nozzle placement.

The instruction calls for 6-8" from the throttle body and I have a JLT gen 1 (maf close to the throttle body).

The only place I see to put the nozzle is on the inside bend of the intake connector which is connected to the throttle body and makes it about 3-4" or so away from the throttle body..

Any suggestions???

Pic of intake elbow that's in question..

 

[Brutal Metal]

mount it right behind the throttle blade on the underside of the elbow, might have to fab a piece inside to thread the nozzle onto...

 

[cobracide]

Most people put the nozzle in the elbow for a straight shot into the throttle body.

 

[Slobanator]

Ok sweet, ill mount it there then.

I just didn't want to take any risk installing it closer then the recommended 6-8" it called for in the instructions. Don't want it pooling up or anything lolol

 

[Brutal Metal]

I had mine about an inch away from the throttle blade on my 89GT if that makes you feel more at ease!

 

[Slobanator]

Achually it does!!! Lol

 

[ctgreddy]

i dont think it'll pool up, I have a plate kit which is right off the blower on an eaton, and lots of people have used this with good results, cant get it any closer than that lol

 

[Slobanator]

Sweeet