I am currently sold out of the m122/tvs adapter plates. Interest is slowing down so I can't front all the money for the next round. If I can get 3 people to give a $200 deposit I will make another run of 5 plates. You will be able to get either black anodized or bare, same cost. What you get is the m122/gt500/tvs/whipple 2.9 adapter plate and throttle body adapters complete with all the bolts and gasketing material needed (silicone o-rings). This adapter plate will allow you to bolt any stock m122, or replacement gt500 blower (2.3tvs, 2.9 whipple etc.) onto a lightning midplate (adapters are drilled for all years midplates, 99-00 and 01-04). The "kit" will include the following:
1 - m122 adapter plate made from 6061-t651 aluminum, 1", thick with silicone o-ring gasket
8 - m10-1.5x80mm bolts to hold adapter to stock midplate
10 - 5/16-18x1.5" bolts to hold m122/gt500 blower to adapter
1 - throttle body adapter to mount lightning throttle body to gt500 or Roush elbow, 1" thick, with silicone o-ring gasket
2- m6-1.0x55mm bolts to hold tb and adapter to gt500 elbow
2 - m6-1.0x35mm bolts to hold adapter to elbow
2 - 1/4-20x1.125" bolts to hold tb to adapter
1 - Cobra engineering IAC adapter plate
Cost is $565 shipped (money sent via paypal for goods)
CONTACT INFO: [email protected]
Pictures:
installed with Roush elbow:
1 - m122 adapter plate made from 6061-t651 aluminum, 1", thick with silicone o-ring gasket
8 - m10-1.5x80mm bolts to hold adapter to stock midplate
10 - 5/16-18x1.5" bolts to hold m122/gt500 blower to adapter
1 - throttle body adapter to mount lightning throttle body to gt500 or Roush elbow, 1" thick, with silicone o-ring gasket
2- m6-1.0x55mm bolts to hold tb and adapter to gt500 elbow
2 - m6-1.0x35mm bolts to hold adapter to elbow
2 - 1/4-20x1.125" bolts to hold tb to adapter
1 - Cobra engineering IAC adapter plate
Cost is $565 shipped (money sent via paypal for goods)
CONTACT INFO: [email protected]
Pictures:
installed with Roush elbow: