Pre-Order an M122/TVS adapter plate

[tgarlock]

I am currently sold out of the m122/tvs adapter plates. Interest is slowing down so I can't front all the money for the next round. If I can get 3 people to give a $200 deposit I will make another run of 5 plates. You will be able to get either black anodized or bare, same cost. What you get is the m122/gt500/tvs/whipple 2.9 adapter plate and throttle body adapters complete with all the bolts and gasketing material needed (silicone o-rings). This adapter plate will allow you to bolt any stock m122, or replacement gt500 blower (2.3tvs, 2.9 whipple etc.) onto a lightning midplate (adapters are drilled for all years midplates, 99-00 and 01-04). The "kit" will include the following:
1 - m122 adapter plate made from 6061-t651 aluminum, 1", thick with silicone o-ring gasket
8 - m10-1.5x80mm bolts to hold adapter to stock midplate
10 - 5/16-18x1.5" bolts to hold m122/gt500 blower to adapter
1 - throttle body adapter to mount lightning throttle body to gt500 or Roush elbow, 1" thick, with silicone o-ring gasket
2- m6-1.0x55mm bolts to hold tb and adapter to gt500 elbow
2 - m6-1.0x35mm bolts to hold adapter to elbow
2 - 1/4-20x1.125" bolts to hold tb to adapter
1 - Cobra engineering IAC adapter plate
Cost is $565 shipped (money sent via paypal for goods)
CONTACT INFO: [email protected]
Pictures:

installed with Roush elbow:

 

[spray'n mach 1]

I dont have a lighting but that is some nice work...

 

[tgarlock]

I dont have a lighting but that is some nice work...

Thanks man. I like to tinker, this turned out well.

 

[joel3431]

2nd That ^^ Nice Job.

 

[04Mach1Blurr]

You designing anything for the terminator H122 swap?

 

[force feed]

You designing anything for the terminator H122 swap?

This

 

[tgarlock]

You designing anything for the terminator H122 swap?

If I had a terminator to mock things up on I would, but I sold my 04 cobra.

I would really like to make a blower kit for 99-04 GT mustangs and use the GT500 blower, it would make for a fun little car, but I need one of those too.... that reminds me, I am in the market for a true blue GT/Bullitt/Cobra if anyone knows of one for sale send them my way.

 

[colby ourso]

I have a Brand New 08 Shelby gt500 sc/tb for anyone
Needing one to go with this adapter kit

 

[roadracer13200]

Any chance you might share your drawings with me? I have a V10 project I am building and have taken 2 Lightning lower intakes and cut and welded them together to create a lower intake for my V10. I already have a gt500 supercharger and am just starting to figure out the interfacing between the two. My thoughts are that I could use your drawings and extend the plate to fit the longer "bathtub" of my new intake?

Paul

 

[tgarlock]

Any chance you might share your drawings with me? I have a V10 project I am building and have taken 2 Lightning lower intakes and cut and welded them together to create a lower intake for my V10. I already have a gt500 supercharger and am just starting to figure out the interfacing between the two. My thoughts are that I could use your drawings and extend the plate to fit the longer "bathtub" of my new intake?

Paul

I could absolutely help with this! i am very glad you are doing this, its a project i have talked about doing for some time.

email me at [email protected] and we can discuss options.