Porting blower. Please check my list in here...

[Matt-'00GT]

I'm sending my blower out for porting (Stiege) tomorrow and want to know what else I should be ordering.

LFP Radiator
LFP Coolant Reservoir
Diablo Sport (will tune on a dyno)
BilletFlow pulleys (2.76 or 2.93?)

What else should I get to maximize power safely? This car is not a daily driver but at the same time I want a car that I don't have to put dual fuel pumps on, etc..

I already have the borla stinger catback installed and have no intentions of changing out the mid-pipe. I also have the LFP H/E installed.

Do I need a new MAF? New injectors? Spark plugs?

Thanks

 

[Machinator]

I would run a 2.93 and a 4lb lower, as well as all the cooling stuff you mentioned.

 

[NHRACobra]

I would run a 2.93 and a 4lb lower, as well as all the cooling stuff you mentioned.

+1 :banana:

 

[BLK04]

A mafia, sct 2400, or maf-xtender wouldn't hurt.

 

[dougwg]

I would go with SCT tuning if at all possible.

and yes , you should get some NGK TR6 Spark plugs (gapped @ .032")

 

[Matt-'00GT]

Doug,

Just placed my order with you. I decided to go with a 2.93 pulley (no plans for lower). Looking forward to receiving your product.

Thanks for the recommendations as well.

 

[stangd1909]

4# lower.... :rockon: :rockon: you won't regert it!!!!!!

 

[sedanman]

I have had a lot of luck with just a upper and I glad I did it this way but that being said the 4# upper arrived I am just waiting on a few other things before it goes under the knife for some new fun.

It sounds like you have all your ducks in a row and are ready to go, don't forget the TR6's. Also you MAY need a BAP.

 

[Screamin Cobra]

i might just switch to a 2.93 and 4# lower after i go with a stiege :rockon: 16.5# :rolling:

 

[crizzut]

steg recommends 16 PSI for optimal performance

 

[utfan98]

Will the 2.93 with 4# lower get you to 16psi?

 

[dynobobstieg]

2.93 upper with 4 # lower 16.5 #s boost- With that combo recommend Bap and Maf extender.