Ponystop nmra coyote stock build

[Waynebuilt]

Old setup of my Ebony Black 97 Cobra

1997 SVT COBRA
Interior 10/10
Clean title
98k on chassis
PPG ebony paint

Maximum Motorsports caster camber plates
Maximum Motorsports bump steer kit
UPR coil over sleeves
Eibach Springs
Bilstein adjustable dampers up front
Koni adjustable in rear
Kenny Brown 6 point cage
Hotchkiss rear upper and Lower control arms
Steeda sub frame connectors
cross drilled and slotted rotors
carbon pads
SS brake lines
Fr500 17/10.5 rear 17/9 front
Nitto 555 275/40/17
Nitto Nt05r drag radials 315/35/17

<Kenne Bell 1.7 Supercharger
BBK cold air intake
Accufab monoblade tb
90MM mass air
42 pound injectors
IMRC delete> for sale
Magnaflow catback 2.5
Mac H pipe 2.5
king Cobra stg2 clutch kit

Tuned @ DMP ( Dontes Modular Performance) 420 rwhp @ 10psi
SCT handheld

@ the Ponystop in Reseda ca.

Coyote stock class build parts list


NMRA Coyote stock sealed racing engine M-6007-M50S*
Ford Boss 302 alternator kit
Power by hour 1996-2010 Coyote accessory bracket kit
Coyote Street Accessory Bracket Kit
Coyote swap pedal bracket
OEM 94-95 5.0 Radiator

Electronics...
Ford racing control pack
MSD 2-Step Launch Controllers 8731
Ford Racing Speed-Dial

Front-end Suspension...
Maximum motorsports k member
Maximum motorsports ctrl arms
Maximum motorsports bolt thru bump steer kit
Maximum motorsports rack bushing kit

Exhaust...
Bbk coyote swap header 1 ¾
Bbk coyote swap x pipe 3in
Mac 3 in cat back

Drive-train...
Transmission Built Cobra T45
Ram Oem replacement clutch
Ram billet steel flywheel
FRPP Aluminum drive shaft
Rear end FRPP 4.11 & 4.56

Mounts...
99-04 Mustang Prothane 4.6 motor mounts
96-98 Mustang Prothane transmission mount
Stifflers transmission cross member TCB-M03

FueL...
Walbro 255
Aeromotive Return FPR
Russell coyote fuel rail adapter
Red horse SBL #6 X 3' x2
Red horse SBL#6 X 6' x1
EARLS FTG AL TBE ADP -6 MAL 1/4
EARLS FTG AL TBE ADP -6 MAL 5/16
SUMMIT Fitting, Straight, Male -6 AN to Straight Cut Male -6 AN O-Ring, x3

 

[Waynebuilt]

updates!

 

[CobraBob]

It's coming along nicely. Can you also post a couple of photos of the exterior (front end)?

 

[Sn8kebitten]

Very nice! What route are you going with the transmission? Keeping the t45?

 

[TClark22]

sweet project!! Can't wait to get going on my coyote swap!

 

[flowgoode]

op: Very Nice!

 

[cobrasvtcoupe25]

Very nice!

Are you planning on making it Cali legal? If so how?

 

[94Gt5.0]

Sub'd

 

[Waynebuilt]

It's coming along nicely. Can you also post a couple of photos of the exterior (front end)?

Very nice! What route are you going with the transmission? Keeping the t45?

I have a few different transmission to try out as of right now i'm running a face plated 97 cobra spec t45

Very nice!

Are you planning on making it Cali legal? If so how?

The car is already cali legal


Thanks for the love guys

 

[Jfoster]

Noticed the control arms in the top holes... I've been trying the same thing but due to the requirement of mounting the rack so low, I cant get my bumpsteer even close to correct. It's borderline dangerous.

 

[Waynebuilt]

Noticed the control arms in the top holes... I've been trying the same thing but due to the requirement of mounting the rack so low, I cant get my bumpsteer even close to correct. It's borderline dangerous.

What's ur setup

 

[99cobra09]

Nice to see guys from the "SFV Valley" having cool projects.

 

[Jfoster]

Check 93coupe.com

93 coupe with 2012 boss 302, MM suspension...

 

[Waynebuilt]

nice setup

 

[Waynebuilt]

updates

 

[NitrousExpress]

Very nice! That coyote looks well in there.

-Garrett

 

[Waynebuilt]

Thanks want contribute a nitrous kit

 

[NitrousExpress]

If you PM me your email I will send you over the form.

-Garrett

 

[Waynebuilt]

pm sent

 

[tj4891]

very nice, i have seen the build on Instagram. u will love the swap!!!