PIC request H&R " RACE " SPRINGS

[gazim]

Please help me out guys i need a 100% confirmed pic of a termi with H&R RACE springs with no iso's all around... a nice clean profile pic


I really want to know if the car still sits level, OR DOES IT SAG in the rear when there are no iso's all around.

I know this has been asked a million times but there are bad angle shots of car on here and everything is different, top iso out, bottom iso out, i can't tell what is what anymore... i need confirmation from someone who has done this or know the sagging question, sorry for the tedious message here but i just want to know what is real and what works. I have just look at too many varying photos, that to me don't make sense. I feel like i need a helmet and a short bus..lol

i want my car level, and i only want to run RACE springs.. please help me out because I'm about to order stuff for spring time. :reckon:

POST as many as you can guys,

thanks

 

[JustaGT]

I wouldn't mind seeing some race springs with all the isos in too.

 

[Bdubbs]

I have them with all iso's in place, let me know if you want pics.

 

[b_dike]

I don't have any iso's at all. Car sits level, but I don't have any good profile pics for ya to look at, sorry. I'd take some but she's on stands at the moment, and it's snowing...:shrug:

 

[gazim]

I don't have any iso's at all. Car sits level, but I don't have any good profile pics for ya to look at, sorry. I'd take some but she's on stands at the moment, and it's snowing...:shrug:

See man, I thought it should (sit level) thats wicked.... I'm pretty sure i like how the front sits with NO iso's its just the rear that has got me confused.

Its the dreaded sit level on an empty tank and sag a little bit when the gas tank is full.. I want it level when its full.. thanks for the info, maybe you could just pos a pic if you do have any? now that i know its level i can tell more. you rock dude! :dancenana:

 

[gazim]

I have them with all iso's in place, let me know if you want pics.

if its a profile shot sure! at this point i need to see everything from actual owners with specs! thanks dude! :beer:

 

[BoostedByV]

iso all around
still hits on speed bumps going over 4-5 mph

 

[BoostedByV]

315/35/17 on 10.5 rim
full tilt boogie everything ( don't know if that makes a difference)

 

[1Kona_Venom]

No iso's stock suspension in sig.....I will post some more pics shortly

no is does not sag and I have the floor to fender lip measurements as well; brb



Here is the link---------> http://www.svtperformance.com/forum...ew-H-amp-R-s-TF-Wheels-**SY-PORN**&highlight=


** the rear is 1/4" of an inch higher than the front

 

[Bdubbs]

All iso's in place

 

[gazim]

315/35/17 on 10.5 rim
full tilt boogie everything ( don't know if that makes a difference)

awesome man! thank you this is really going to help me out! and car looks good love the deep dish's :coolman:

 

[gazim]

No iso's stock suspension in sig.....I will post some more pics shortly

no is does not sag and I have the floor to fender lip measurements as well; brb



Here is the link---------> http://www.svtperformance.com/forum...ew-H-amp-R-s-TF-Wheels-**SY-PORN**&highlight=


** the rear is 1/4" of an inch higher than the front

I you could post a profile pic that would be amazing... and your car looks amazing and has a great stance... exactly what i am going for, thank you for your help. There aren't too many nice cobras to look at around where i am from. I bought my car last fall and haven't had any time to see them in person but i need to order springs very shortly for the spring season here.. Its snowing now...
don forget the pics!!! lol

 

[03' White Snake]

My sig is race springs with no isos, but I have the 1/2" spacer installed up front from my Steeda X2 ball joints. Front sits much lower than rear with no iso's.

Here are a few old pics. About a week after installing the springs with no iso's and no Steeda spacers.

 

[gazim]

1/2 in spacer in the front???

and nice car bro... thats a very rare car in that colour combination... being a vert. looks bad ass.. I am from Toronto Canada, and there are only a hand full of white Verts up here. I would have to guess its 25 maybe in the whole country give or take.. Very rare car North of the border.

And just so I'm clear the very bottom pic u posted up has no iso's? Fill me in on the spacer. i have never run steed ball joints in any of my dozen Stangs. Im On OEM 17's and will have to stay this way for this year i just want it level of a bit higher in the rear. (not raked) tho. level on a full tank is important to me.

thanks for the post.

 

[Two 5.0s]

Here's mine. Iso's in place.

 

[03' White Snake]

1/2 in spacer in the front???

and nice car bro... thats a very rare car in that colour combination... being a vert. looks bad ass.. I am from Toronto Canada, and there are only a hand full of white certs up here. I would have to guess its 25 maybe in the whole country give or take.. Very rare car North of the border.

And just so I'm clear the very bottom pic u posted up has no iso's? Fill me in on the spacer. i have never run steed ball joints in any of my dozen Stangs.

thanks for the post.

Thanks man. My vert, oxford white with parchment is 1 of 137.

Steeda ball joints lower the front end a 1/2". They provide a spacer that will raise it back to stock height.

Every pic I posted is with no iso's. The last pic I believe is no isos and no spacer, so its an extra 1/2" lower up front. Its a bit to low to drive around. My front tires would rub on the top of the fenders so I put the spacers in.

http://www.steeda.com/steeda-x2-mustang-balljoint-kit-555-8101/#/product/504

 

[gazim]

I know the Car combo.. i worked at a dealer for 16 years i was 23 when they came out..they were my life back them man..lol I have only ever actually seen one oxford/parchment in person all my life up here the other few are black roof and graphite interiors. I alway white with a light interior. looks sassy classy !

Back to the springs.. so if i am stock and just use race springs (no iso's) i will have just about level, with the rear up about 1/2 ? This is what I'm figuring from what others have posted up for me... (which i appreciate very much)

 

[03Predator]

Not strictly a side pic but all I have right now. All isos in.

 

[Pantera1]

 

[SVTDice]

This is my setup. Hope this helps, No Iso's in the front Iso's in the rear. H&R Race springs.