? on cost.

[03ZYTERMINATOR]

Thinking about going turbo. Hellion kit, start to finish with supporting mods what is a ball park price. That's kit to dyno.

 

[Janstang]

Depends..Which headunit do you want?

 

[Mach3]

With there 76mm head unit I would geuss around 9k.

 

[mixxer]

PM TRBO VNM[jason] he will tell you exactly how much . he sells the whole set up and will give you a good deal if you decide to go that way.

 

[03ZYTERMINATOR]

Thanks for the info.

 

[TurboV3nomVa]

turbo, proper fuel system , install and tune around 10-11 grand give or take. Im gettin ready to do one on my cobra within the next few weeks. good luck

 

[mustarrosa]

Check out HPP Racing and check pricing..as for as horsepower goes the HPP system will shock and awe you..

 

[TRBO VNM]

Depends..Which headunit do you want?

the terminator kit comes standard with the 76mm. you can do the bb upgrade.

I assume you might be talking about the 76 or 88 kit.

the 76 kit is in stock and can ship within days. I believe the 88mm kit is as well.

 

[TRBO VNM]

Check out HPP Racing and check pricing..as for as horsepower goes the HPP system will shock and awe you..

what is the pricing? from what I saw posted a few months back the HPP kit could run around 3k more than the hellion kit.

 

[TurboV3nomVa]

FMTT9604-46-1
1996-2004 4.6 MUSTANG STAGE I TWIN 50mm TURBO KIT
$6,395.00

FMTT9604-46-2
1996-2004 4.6 MUSTANG STAGE II TWIN 57mm TURBO KIT
$6,895.00

FMTT9604-46-3
1996-2004 4.6 MUSTANG STAGE III TWIN 67mm TURBO KIT
$7,895.00

AWICFM9604
AIR TO WATER INTERCOOLER
$975.00

 

[TRBO VNM]

FMTT9604-46-1
1996-2004 4.6 MUSTANG STAGE I TWIN 50mm TURBO KIT
$6,395.00

FMTT9604-46-2
1996-2004 4.6 MUSTANG STAGE II TWIN 57mm TURBO KIT
$6,895.00

FMTT9604-46-3
1996-2004 4.6 MUSTANG STAGE III TWIN 67mm TURBO KIT
$7,895.00

AWICFM9604
AIR TO WATER INTERCOOLER
$975.00

that is the HP kit. totally different company from the HPP kit and everyone keeps getting them confused. the HPP kit looks more like the THP kit. the HP kit is the one that puts the turbo's behind the bumper. the HPP and the THP have the turbo's in the engine bay and require battery relocation.

 

[CHINI]

thats the basic hp kit... YOu still have to get stuff polished and jet coated... I ended up paying 7900

 

[TurboV3nomVa]

oops you're right, at least it does give a fair comparison of the cost difference tho, and you're right, those prices never acct for all the lil extras that you need. Its not cheap to say the least.

 

[CHINI]

yea and thats with deletions.. Kit came out to 8900 but then i had lots of deletes.

 

[smashedheadcat]

My HP kit was $7684 to the door. I don't know what you need to have polished and jet hot coated. The entire kit comes jet hot coated inside and out. I don't know why anyone would pay to have the compressor housings polished on the HP kit, you don't see them anyway.

HP 50mm turbos
Chip delete
billet blow off valve upgrade
add KB BAP

 

[Janstang]

I got the Y2K setup for $7400, all to my door within 10 days. Keep in mind that with my 01 I didn't need the k-member, fuel system or intake stuff.

 

[TRBO VNM]

that y2k is a huge cost increase over the 76mm. the kit itself doesn't cost that much more. the turbo is what really drives the cost up.

 

[Janstang]

IIRC, from the 76 to the 88 was an additional $1000-1200. Somewhere in that neighborhood anyhow..