Whats the biggest width of Nitto NT555R I can get on a 18x9 rim? I know the Nittos (or some of their models at least) fit narrow, and I believe people have said in this forum that a 305/35/18 will fit nicely on an 18x9 rim.
On a 9"? That I would have to see. 315 Nitto's bulge a bit on 10' Saleens, how on Earth would they fit a 9"?315 will fit just fine. Nitto's run small
That's right, I remember now. It jumps from 305 to 335 in 18".there is no 315 nitto 555r in 18" you will be fine with the 305/35/18 Toasty
315 will fit just fine. Nitto's run small
IIRC, only the 17" 555R's run small. I've got the standard NT555 in 285 35 18 on a 18x9 and there is a slight buldge to it.
Anyhow, iirc Nitto only makes the 555R in 285 and 305. Save yourself some money and go 285, 305 is too big for a 9" wheel.
/thread. :beer:I've got the standard NT555 in 285 35 18 on a 18x9 and there is a slight buldge to it.
That's right, I remember now. It jumps from 305 to 335 in 18".
Again, I'd have to see a 305 on a 9" to believe it.
well i used to have 18x9.5 y2ks and with a 285/35/18 555 street the side walls were flush. The 285 555 is a tad wider than the 285 555r (per nittos web site) I then got some 295/35/18 bfg drag radials and mounted them on the y2ks and they had just a slight bulge. IMO 295 bfg dr is about the same width as the 305 nitto. (since bfg runs super wide) The 305 nitto will look decent on the 9 inch wheel you have.