Hey guys, getting my car setup for Nitrous and had some questions. Currently running the Boss manifold and an Accufab 84.5mm throttle body. Bought a Nitrous Outlet hardline plate kit, and went to install.
I had to get 10mm longer bolts to clear the plate, and went with Allen key cap screws to clear the throttle body. Had to drill out the holes on the bracket a bit to clear the side (didn't want to grind the TB OD to clear), but my issue seems to be that the hardlines are not long enough to reach the solenoids.
Has anyone had this issue? How did you remedy it? Anyone have installed pictures if you had to modify anything?
Open to suggestions, trying to be installed and tuned before the track opens.
I had to get 10mm longer bolts to clear the plate, and went with Allen key cap screws to clear the throttle body. Had to drill out the holes on the bracket a bit to clear the side (didn't want to grind the TB OD to clear), but my issue seems to be that the hardlines are not long enough to reach the solenoids.
Has anyone had this issue? How did you remedy it? Anyone have installed pictures if you had to modify anything?
Open to suggestions, trying to be installed and tuned before the track opens.