I started datalogging, and while I get some of the PIDs and why they are relevant some I don't. Can someone enlighten me on what the following PIDs mean and what values I am looking for?
ipsibr_IN_ppm (?)
ETC_ACT - is this Actual Throttle opening vs commanded?
MAF_in_lbm_per_min - what's a good vs bad value?
LOAD_as_a_fraction (?)
PPS-APP1 (?)
tq_source_pid (?)
MAF_Hz (?)
AFR1, AFR2 - I presume these should ideally show a "1", and go low when rich - how can you figure out real AFR from these values?
TFT11, STFT21 (?)
LTFT11, LTFT21 (?)
FRP_relative_in_PS (?)
FRP_ACT (?)
TQ_DD_LIMIT (?)
I apologize - I scoured the net and cant find these. If anyone has a link let me know...
ipsibr_IN_ppm (?)
ETC_ACT - is this Actual Throttle opening vs commanded?
MAF_in_lbm_per_min - what's a good vs bad value?
LOAD_as_a_fraction (?)
PPS-APP1 (?)
tq_source_pid (?)
MAF_Hz (?)
AFR1, AFR2 - I presume these should ideally show a "1", and go low when rich - how can you figure out real AFR from these values?
TFT11, STFT21 (?)
LTFT11, LTFT21 (?)
FRP_relative_in_PS (?)
FRP_ACT (?)
TQ_DD_LIMIT (?)
I apologize - I scoured the net and cant find these. If anyone has a link let me know...