New personal best NA stock intake manifold and stock exhaust manifolds

[2115criss]

How's it going everyone. yesterday I was able to reached the goal I've been looking for which was to go 10s on the stock intake manifold and stock exhaust manifolds. If I'm not mistaken this is a new record with this setup but I could be wrong.
10.94@124
10.96@124

DA was -300
race weight was right under 3400
Here are the mods
Stock intake manifold ported
Stock exhaust manifolds
O/R X pipe
Accufab TB
CAI
E85 tune by AED
DSS aluminum driveshaft
No passenger seat
Nothing inside the trunk
No front sway bar
Lightweight battery
No wipers and motor
3.73 gears
Built rear end 33 spline axles and lightweight spool
UCA
LCA with relocation brackets
Viking shocks
Cobra jet springs
Welds rts all around
26 " front runners
28x10.5x15 mickey thompson slicks
Special thanks to Shaun from AED for the support and help.

I might be forgetting something so feel free to ask, looking for some feedback and I'm pretty sure y'all can help me. Thanks in advance

 

[2115criss]

Trying to upload pics but it won't let me

 

[rsb213]

That is awesome man. You could always upload them to imgur then link them here if the site is giving you issues.

 

[SNIPER]

Congrats!!!

 

[cobrasnake2003]

Nice job! Photobucket is what I have to use to upload on here. Attachments never work for me personally.

 

[2115criss]

That is awesome man. You could always upload them to imgur then link them here if the site is giving you issues.

Congrats!!!

Nice job! Photobucket is what I have to use to upload on here. Attachments never work for me personally.

Appreciate it, guys. I'll be trying to get a faster pass probably next or the week after. Here is the link to the videos

https://youtu.be/FtfOwvQS_xY

https://youtu.be/jY_GB6U-TQE

 

[2115criss]

http://imgur.com/81CYo5B

 

[2115criss]

http://imgur.com/v4AGpwK

 

[wolfman311]

Are you running bias or radial front runners?

 

[cobrasnake2003]

You running through mufflers or just the open x-pipe?

 

[yeahloh95]

purestock has went quicker with a stock intake maniflold . nice pass either way

 

[Grabber]

purestock has went quicker with a stock intake maniflold . nice pass either way

http://www.svtperformance.com/forum...-10-87-125-38-Stock-Manifold-MT-82&highlight=

Pure Stock has LT Headers, the OP does not. Those are good for a nice boost in Power. Both were running in NEGATIVE DA.

Props to both guys. Just laying out the facts for the OP.

 

[2115criss]

Are you running bias or radial front runners?

Radial front runners, I need to switch them out. Since I'm running a bias ply on the rear.

 

[2115criss]

purestock has went quicker with a stock intake maniflold . nice pass either way

Yeah I know I'm not the fastest on the stock manifold, but I think I have the quickest on stock manifold and stock exhaust manifolds. He has long tubes and his car weights at least 100 lbs less than mine.

 

[2115criss]

You running through mufflers or just the open x-pipe?

This passes were done open x pipe. I do plan on running full cat back and see what it does.

 

[2115criss]

The car is still on
Stock k member
Stock a arms
AC is still on
Stock brakes all around
Stock front and rear bumper supports
Stock driver seat
So there's some weight that can still be remove.

 

[2115criss]

http://www.svtperformance.com/forum...-10-87-125-38-Stock-Manifold-MT-82&highlight=

Pure Stock has LT Headers, the OP does not. Those are good for a nice boost in Power. Both were running in NEGATIVE DA.

Props to both guys. Just laying out the facts for the OP.

Appreciate it. And thanks for making things clear.

 

[MeanGreenBoss]

Awesome pass! So no problems with the stock clutch slipping or causing high RPM shift lock out? Stock shifter too? TIA!

 

[Shaun@AED]

You beat me, my best with the stock IM/Exhaust manifolds was 10.97.

Congrats on the excellent ET/MPH!

10's from a bolt-on NA mustang is extremely impressive.

Thread from how my car was setup and the DA if anyone is interested:
http://www.svtperformance.com/forums/showthread.php?876095-Bolt-On-All-Motor-AED-GT-goes-10-s

 

[2115criss]

Awesome pass! So no problems with the stock clutch slipping or causing high RPM shift lock out? Stock shifter too? TIA!

I think it won't be long until it starts slipping the clutch has 34k miles and it's been race at least 20k out of those 34k. No I have a Barton shifter.