hi guys i got a 04 cobra with a ported eaton, 2.8 up, 4lb lower. I have full exhaust work,accu throttle,and a 50 shot nos. just took the car to the dyno my results were not impressive. I only made 465hp & 533lbs torque. I was exspecting to be in the 500. with the nos i made 580hp & 601 torque. do these numbers sound ok? or is there something wrong with my combo?
need to know plz help
- Thread starter viperstang
- Start date
that looks about right. hp might be a bit low, but what were your IAT2 temps? coolant temps? timing? what port do you have?
with a 6# lower, 2.93 upper and amazon port I only made 485rwhp.
your nitrous also looks about right as well for a 50 shot.
just a fyi, you are posting this in the turbo forum
BTW, if you can go and run a number, dyno numbers mean jack shit.
with a 6# lower, 2.93 upper and amazon port I only made 485rwhp.
your nitrous also looks about right as well for a 50 shot.
just a fyi, you are posting this in the turbo forum
BTW, if you can go and run a number, dyno numbers mean jack shit.
Users who are viewing this thread
