Well I just got off the phone with my tuner. My car is idling really high (1800rpms). He made half a pull and the car made only 7psi and 350whp???? A coupler popped off and once that happened the car idled perfect. I have a fmic on it. With the piping hooked up it idles really high and when piping is disconnected it idles fine. Also I am pretty disappointed at the dyno pull. 350whp.... With all my mods I should be way higher than that. Mods are...
Mmr 4.75 shortblock
Mhs stage 2 heads with cms stage 3 blower cams
Edelbrock intake accufab plenum and tb
Vortech strim with fmic and Anderson power pipe. 3.12 pulley
L/t headers o/r h pipe flows dumped
Upgraded fuel system
And supporting mods
Also Another thing I forgot, I have a vortech max flow bypass valve. Do you think if I adjust the screw on it it will help with the idle? I've never touched the screw. While at idle barely any air comes out of it. Will adjusting the screw help it open up at idle and maybe fix my idle problem?
Can anyone help me out and tell me wtf is going on?? Also I got a pretty good oil leak comin from the rear of engine. When it rain it pours
Mmr 4.75 shortblock
Mhs stage 2 heads with cms stage 3 blower cams
Edelbrock intake accufab plenum and tb
Vortech strim with fmic and Anderson power pipe. 3.12 pulley
L/t headers o/r h pipe flows dumped
Upgraded fuel system
And supporting mods
Also Another thing I forgot, I have a vortech max flow bypass valve. Do you think if I adjust the screw on it it will help with the idle? I've never touched the screw. While at idle barely any air comes out of it. Will adjusting the screw help it open up at idle and maybe fix my idle problem?
Can anyone help me out and tell me wtf is going on?? Also I got a pretty good oil leak comin from the rear of engine. When it rain it pours