Guys im embarassed to even ask this question,But Ive pulled every damn bolt off the control arms except for the sway bar bolts,still got the axle in the hub and Ive even got the springs compressed about half way. What does it take to get this springs out. Any Info at all would greatly appreciated.
Need Help with getting the springs off my Cobra........
- Thread starter SJ-KY
- Start date
Yeah Im going to buy some new spring compressors right now I think mine are just to bulky two fit on each side.
holy crap man. there is no need to take all that apart or even use a spring compressor.
all you do is remove the shock bottom bolt and both IRS bolts and the drops down plenty to remove and replace the springs. Some IRS's will drop enough to where the spring will literally fall out. When the bolts are removed and IRS lowered on that side, pull the spring down and out from the top of the spring, not the bottom. you are making it harder than it is. I almost did the same thing my first time.
all you do is remove the shock bottom bolt and both IRS bolts and the drops down plenty to remove and replace the springs. Some IRS's will drop enough to where the spring will literally fall out. When the bolts are removed and IRS lowered on that side, pull the spring down and out from the top of the spring, not the bottom. you are making it harder than it is. I almost did the same thing my first time.
Users who are viewing this thread
