This car has a great history. It's my 3rd Cobra and undoubtedly the best I have owned.
Currently has 21,--- and change.
Price is $33,500 trade value. Or best offer.
I'm located in Springfield, Mo.
The Original Twin Turbo Mystichrome on I-forged wheels! Completed in 2006 by Dynospeed racing, Nashville TN.
Vehicle: 2004 Ford Mustang Cobra
Mileage: 20,xxx
VIN: 1FAFP48YX4F168227
It placed second at the 2007 King of the street and has won numerous car shows. It was in the May issue of 5.0 Magazine. 80 percent of the work was done by Dynospeed Racing. The car made 935 rwhp with a little gas 805rwhp on boost only thru the auto. Fastest pass to date a 9.6 at 144mph NO NITROUS. The car has five 1/4 mile passes made on it. Below is the mod list. Thanks for looking.
Video: Erics Mustang - YouTube
5.0 Magazine weblink:
2007 Nitto Tire King of the Street - Eric Chappa - 5.0 Mustang & Super Fords Magazine
Engine/Drivetrain:
-Sullivan upper and lower intake (polished and smoothed) Very rare and no longer produced.
-Zolner / Mahle forged pistons, Manley H beam rods, Cobra forged crank. (factory built)
-Stock 4v heads with cooling mod (chrome valve covers)
-4R70W transmission built by Earl Shexnayder with transbrake, overdrive and lockup, 3500rpm Torque Converter built by Precision Industries with B&M Hammer shifter. Trans built equal to a Lentech Strip terminator except it retains Lockup and OD. Lentech full manual valve body (manual shifting only), OD and lockup activated by push buttons. 3.73 rear gear.
-Ford Racing aluminum drive shaft.
Forced Induction
-Turbo Horsepower THP twin turbo Turbonetics 61mm turbo kit (upgrade) , 44mm Tial wastegates and billet blow off valve.
-ZEX nitrous wet kit, hidden box with custom bent stainless lines to a carb style plate. Bottle paint matched in Mystichrome.
Fuel Delivery
-Sullivan fuel rails (polished)
-Siemens Delka 60lb fuel injectors
-Return Style Aeromotive Eliminator pump, Aeromotive regulator, Aeromotive pre and post filters, -10 stainless braided lines, and MMR sumped tank
-included but not installed, aeromotive fuel pump controller
Exhaust
-DynoSpeed Racing built midpipe
-Borla Stinger catback
Suspension (Drag setup, very stiff and noisy, but puts the POWER down straight and smooth!)
-Skinny Kid Racing coilovers (front and rear)
-Strange adjustable shocks
-Strange adjustable struts
-k member QA1
-Steeda subframe connectors
-Wolf Race Craft rear suspension kit with frame mount sway bar (not hooked up bc of tailpipes)
-Solid rear axle 8.8" with 31 spline axles, Auburn Pro differential built by Earl Shexnayder, built, braced, and welded, 3 inch ARP studs. Pre 98 housing used to fit wider lip on the wheels. Adjustable upper and lower tubular control arms with heim joints and metal bushings. C-clip eliminators.
-Steeda bump steer
Tuning
-SCT excaliber 2 with 3 tunes by DynoSpeed Racing. 93(street)/c16(kill)/c16+nos(full tilt boogie!!)
-Greddy Pro Spec B electronic boost controller (lo and high settings)
-MAF C&L 110mm with SCT BA2800
-WOT box, from when it was a 6speed
Gauges
-Autometer NV boost gauge (bright green glow)
-Autometer NV electric fuel pressure gauge (bright green glow)
-Raptor shift light (hidden in the ac vent)
Safety
-10 point roll cage painted to match interior by DynoSpeed Racing with spring loaded swing outs, not just cheap looking pins.
-Taylor battery relocation with custom cut off switch. Box paint matched in Mystichrome.
Wheels
-IForged Classics Front 18x9s and Rear 18x11s with Nitto tires, 335's on the rear.
Misc.
-polished and smoothed Sullivan intake
-polished turbos and jet hot coated compressor housings
-powder coated valve covers
-polished and painted coil covers
-painted nitrous bottle
-painted battery box
-painted shifter
-short antenna
-10th anniversary interior pieces
-painted rotors and calipers
-HID headlights and fogs
Audio
-Pioneer 7inch in-dash head unit with NAV and DVD
-JL W6 10inch sub
-JL 6x9s
Currently has 21,--- and change.
Price is $33,500 trade value. Or best offer.
I'm located in Springfield, Mo.
The Original Twin Turbo Mystichrome on I-forged wheels! Completed in 2006 by Dynospeed racing, Nashville TN.
Vehicle: 2004 Ford Mustang Cobra
Mileage: 20,xxx
VIN: 1FAFP48YX4F168227
It placed second at the 2007 King of the street and has won numerous car shows. It was in the May issue of 5.0 Magazine. 80 percent of the work was done by Dynospeed Racing. The car made 935 rwhp with a little gas 805rwhp on boost only thru the auto. Fastest pass to date a 9.6 at 144mph NO NITROUS. The car has five 1/4 mile passes made on it. Below is the mod list. Thanks for looking.
Video: Erics Mustang - YouTube
5.0 Magazine weblink:
2007 Nitto Tire King of the Street - Eric Chappa - 5.0 Mustang & Super Fords Magazine
Engine/Drivetrain:
-Sullivan upper and lower intake (polished and smoothed) Very rare and no longer produced.
-Zolner / Mahle forged pistons, Manley H beam rods, Cobra forged crank. (factory built)
-Stock 4v heads with cooling mod (chrome valve covers)
-4R70W transmission built by Earl Shexnayder with transbrake, overdrive and lockup, 3500rpm Torque Converter built by Precision Industries with B&M Hammer shifter. Trans built equal to a Lentech Strip terminator except it retains Lockup and OD. Lentech full manual valve body (manual shifting only), OD and lockup activated by push buttons. 3.73 rear gear.
-Ford Racing aluminum drive shaft.
Forced Induction
-Turbo Horsepower THP twin turbo Turbonetics 61mm turbo kit (upgrade) , 44mm Tial wastegates and billet blow off valve.
-ZEX nitrous wet kit, hidden box with custom bent stainless lines to a carb style plate. Bottle paint matched in Mystichrome.
Fuel Delivery
-Sullivan fuel rails (polished)
-Siemens Delka 60lb fuel injectors
-Return Style Aeromotive Eliminator pump, Aeromotive regulator, Aeromotive pre and post filters, -10 stainless braided lines, and MMR sumped tank
-included but not installed, aeromotive fuel pump controller
Exhaust
-DynoSpeed Racing built midpipe
-Borla Stinger catback
Suspension (Drag setup, very stiff and noisy, but puts the POWER down straight and smooth!)
-Skinny Kid Racing coilovers (front and rear)
-Strange adjustable shocks
-Strange adjustable struts
-k member QA1
-Steeda subframe connectors
-Wolf Race Craft rear suspension kit with frame mount sway bar (not hooked up bc of tailpipes)
-Solid rear axle 8.8" with 31 spline axles, Auburn Pro differential built by Earl Shexnayder, built, braced, and welded, 3 inch ARP studs. Pre 98 housing used to fit wider lip on the wheels. Adjustable upper and lower tubular control arms with heim joints and metal bushings. C-clip eliminators.
-Steeda bump steer
Tuning
-SCT excaliber 2 with 3 tunes by DynoSpeed Racing. 93(street)/c16(kill)/c16+nos(full tilt boogie!!)
-Greddy Pro Spec B electronic boost controller (lo and high settings)
-MAF C&L 110mm with SCT BA2800
-WOT box, from when it was a 6speed
Gauges
-Autometer NV boost gauge (bright green glow)
-Autometer NV electric fuel pressure gauge (bright green glow)
-Raptor shift light (hidden in the ac vent)
Safety
-10 point roll cage painted to match interior by DynoSpeed Racing with spring loaded swing outs, not just cheap looking pins.
-Taylor battery relocation with custom cut off switch. Box paint matched in Mystichrome.
Wheels
-IForged Classics Front 18x9s and Rear 18x11s with Nitto tires, 335's on the rear.
Misc.
-polished and smoothed Sullivan intake
-polished turbos and jet hot coated compressor housings
-powder coated valve covers
-polished and painted coil covers
-painted nitrous bottle
-painted battery box
-painted shifter
-short antenna
-10th anniversary interior pieces
-painted rotors and calipers
-HID headlights and fogs
Audio
-Pioneer 7inch in-dash head unit with NAV and DVD
-JL W6 10inch sub
-JL 6x9s
Last edited:
