My Full 3" Aluminum Exhaust Build

[DSG2VGT]

I figured I would share my exhaust setup. Ive been wanting to do this for a long time:rolling: And I would like to add a big thanks to Matt over at Kesatie Motorsports for building it for me!

[/UR]

And this is a pic of the car.


Walk Around video:
[video=youtube;GPRWXQJWBms]https://www.youtube.com/watch?v=GPRWXQJWBms[/video]

Mod list:

MGW shifter
UPR Billet Pistol Grip Shifter Handle
Aluminum Drive Shaft
Ford Racing 4.10 Gears
Moser 31 Spline Axles
ARP Wheel Studs
03 cobra Differential
ARP Carrier Bearing Studs
UPR Diff Support Cover
UPR Solid Upper & Lower Control Arms
Solid UPR Diff Bushings
UPR Sub-Frame Connectors
Flamming River Manual Steering Rack
Race Craft Manual Brakes
Strange 10-Way adjustable Shocks Rear & Front
05+ GT Rear Springs
Accufab Throttle Body & Plenum
Steeda 4 Bolt Caster Camber Plates
340 LPH Fuel Pump
AM Short Cold Air Intake
Mac Pro-Chamber Mid-Pipe
Comp Cams 270AH
UPR Tubular K Member
UPR Coil Over's
Pac Valve Springs
Pacesetter Longtube Headers
Full Aluminum 3" Exhaust
Trick Flow Adjustable Cam Gears
Liberty Built T-56
Spec Stage 1 26 Spline LPR

Car made 313 RWHP & 321 RWTQ On a DynoJet.
E-85 Tune By Matt @ Kesatie Motorsports

 

[sam92lx]

Wtf happened to the tips!

 

[Sick SVT]

Exhaust looks good but do something with those tips

 

[klr16G]

I'm sure i wont be the last guy saying this but what where you thinking with those tips my 85 Pontiac fiero had better tips then that

 

[DSG2VGT]

I'm happy with how it came out. And I like the fact that it shows the ACTUAL aluminum tubing, Not some polished stainless tip. I'm going to eventually polish the tips.

 

[Kevins89notch]

Those tips look as horrible as the green 8.8 cover.

 

[coposrv]

Polish it. Put some tips on it and ditch the green diff cover. Pretty cool though.

 

[SVTORANGE]

Beautiful work on the welds

 

[smitty2919]

What's the reason for this? Weight savings?

 

[Great Asp]

Exhaust looks good but do something with those tips

+1

Bad ass set up!

E

 

[CobraBob]

A great custom exhaust setup, but IMO something needs to be done with the tips. As it stands, they give it too much of a "homemade" look. Why not have the shop weld on a nice tip which will made it look so much better. JMO. Nice system for sure, though.

 

[badcobra]

I have a similar setup with custom made exhaust and vbands. But why aren't you running mufflers? It's got to sound like a 17yr old kid in a Chevy truck. Too much noise for a 300hp car.

 

[1992sc50]

Hiw much for this custom setup? Flowmaster makes a 3 in system with mufflers & polished tips for $850. Thats around what i paid thru summit anyways. Love the different sound on my 3" vs the normal 2" systems. Hope u like it.

 

[TClark22]

Thats cool. If you want to be sober and vomit.

Looks like a decent job...then i got to the no mufflers and no tips part...

 

[Georgie]

Why would you use aluminium over stainless?? Aluminum gets too hot. Plus id just cut the tips at a 40º angle...make it look likw classic fox body tips... also in picture #8 thats clearly not aluminum and the weld looks too hot.. show us some of tge aluminum welds please...

 

[03cobra#2]

Looks like a nice build...however with no mufflers I'm thinking it will sound terrible.

 

[Coiled03]

3" exhaust for 313hp?

No offense, but it seems like overkill.

 

[straightliner1]

I'm curious at just how much that aluminum will grow when subjected to full temp heat. Not to mention, with hundreds of heat cycles it may become brittle.

 

[Mentos]

Just the tip

 

[95PGTTech]

thread backfire