I have a 2.76" upper going on the car (stock lower, non-ported blower), and set up my tune with VMP.
I bought FRPP 60lb injectors and a ba2600 MAF at the suggestion of several posters and threads I've read. The Tuner however told me to avoid changing out the injectors and MAF, and just stick with stockers.
Just wanted to get the valued opinions of the people on this forum on that.
Current Mods:
-RAI
-High Flow Straight Pipe <cat delete>
Mods I've purchased:
-FRPP 60lb injectors (not yet installed)
-BF 2.76" upper with 4pc idler kit (Installed idlers, SC pulley should go on tonight)
-LFP DP intercooler (installed)
-NGK TR6 plugs (installed)
-BA2600 (not yet installed)
I bought FRPP 60lb injectors and a ba2600 MAF at the suggestion of several posters and threads I've read. The Tuner however told me to avoid changing out the injectors and MAF, and just stick with stockers.
Just wanted to get the valued opinions of the people on this forum on that.
Current Mods:
-RAI
-High Flow Straight Pipe <cat delete>
Mods I've purchased:
-FRPP 60lb injectors (not yet installed)
-BF 2.76" upper with 4pc idler kit (Installed idlers, SC pulley should go on tonight)
-LFP DP intercooler (installed)
-NGK TR6 plugs (installed)
-BA2600 (not yet installed)