Mods installed and dyno video

[lxMatt]

Here is the pics of the mods i have and the dyno video let me know what you think


http://i1271.photobucket.com/albums/jj624/lxmatt/IMG_1516.jpg

http://i1271.photobucket.com/albums/jj624/lxmatt/IMG_1501.jpg

http://i1271.photobucket.com/albums/jj624/lxmatt/IMG_1500.jpg

http://i1271.photobucket.com/albums/jj624/lxmatt/IMG_1499.jpg

http://i1271.photobucket.com/albums/jj624/lxmatt/SCAN0003.jpg

IMG_1521.mp4 video by lxmatt - Photobucket

 

[92hatchlx]

Who tuned it?

 

[NickSezz]

TQ seems a bit low even for a mustang dyno. Anyone?

 

[92hatchlx]

I was going to bite my tongue until I found out who was tuning it.

 

[Spd2Stang]

TORQ tuned it.

Look at the dyno sheet.

Just me or are they in 6th gear? seems like it takes forever to hit redline.

 

[NickSezz]

I was going to bite my tongue until I found out who was tuning it.

I noticed...:dw:

 

[DIB5.0]

Your TQ is about 20-25 lbs short from cars with the same hp on a Mustang dyno. Friend just did 403/347. Maybe because he had a o/r x pipe.

 

[lxMatt]

The car has 500miles on it and I don't have any exhaust that is probably why my torque was low

 

[steveofiveo]

Is there a before/after difference ?

Curious on the gains.

thx

 

[92hatchlx]

Even with a 15% drive train loss with a stock car you should still be putting out more than that. Sounded like a 5th gear pull. If it was 6th why would they do a pull in your OD gear??? I'm no pro when it comes to nit picking things like an A/F line on a dyno run but it looks like it could be much smoother. How does it run? Are you happy with it?

 

[Red Turtle]

The car has 500miles on it and I don't have any exhaust that is probably why my torque was low

It is a mustang dyno so that is why the numbers seem off. Does this car have 3.31's?

 

[lxMatt]

The car feels alot faster and runs better then the email tune I got from
someone else the car has the stock gears 331

 

[92hatchlx]

Run it at the track. It's the only way to see how the car is performing.

 

[twistedneck]

seems the difference between ORX and catted X pipe are showing again.. OR is the way to go if you can.