MM cc plate/KW V3 install issue

[KBBoss302]

Does anyone know which, if any, spacers I am supposed to use between the coilover and the cc plate? The MM directions state that no spacers are needed for 2011+ whereas the KW directions state that two of their spacers are used on 2011+. However that is if you are reusing the stock strut hats.

Any help would be much appreciated.

John

 

[KBBoss302]

Here are the KW directions - scroll down to page 8 for their spacer discussion:
http://www.kw-store.com/extras/docs/BBXQ/35230045-eah68630045.pdf

And here is the Maximum Motorsports, page 6:
http://www.maximummotorsports.com/Assets/install/pdf/front_susp/Mm5CC-6.pdf

Anyone have any ideas?

 

[HeLLFiRe xx]

To be honest... I would get the steeda upper strut mounts... not mm... as much as I love mm's stuff... steedas kit is so nice... and much beefier than mm. I passed up the mm for steeda and dont regret it... and my boss is on the ground. Look in pics and vids thread to see my post with pics of my car

 

[five.slow]

You use the mm spacers as if you were putting 05-09 struts on your car. I believe it's the short spacer between the strut and mount and the long spacer above the mount in between the nut.