Magnaflow 4" Tip

[Snakey03]

I purchaced the MF cat back and a set of 4" tips.
to mount the 4"ers i cut 2-3" off the end of the tail
pipes then welded the tips on. i made mounts that
the hanger rod goes in and TIG welded them to the
top of the 4" tips. the hanger rod now works the same
as the included tips:beer: i used stainless wire and welded
all seams on the cat back.no leaks and it sounds awsome:thumbsup:
pics below

 

[Snakey03]

heres the tip

 

[Snakey03]

heres the mount

 

[TwoToneFreak]

Those look awesome. Nice job welding it all up. I miss working with exhaust, like I did at Meineke.

 

[AFJsvt]

Nice!
Would you mind posting a pick of a total rear view? I'd like to see the difference compared to stock.

 

[Snakey03]

I'll take one in the morning and add it to the post. if anyones interested i can machine them a pair of the tip mounts!!!

 

[03redfiresnake]

that looks really nice good work, I just like the mf rolled edge tips better, but thaey are chrome not ss.

 

[Snakey03]

heres the full rear view

 

[nj7703]

Originally posted by 03redfiresnake
that looks really nice good work, I just like the mf rolled edge tips better, but thaey are chrome not ss.

Those look great! Do they have the little hole at the bottom of the tip like the other Magnaflow tips do?


Snakey03 your's look great BTW :beer:

 

[03redfiresnake]

thanks snakey03, yes they have the hole at the center bottom, i always have to spray the hose in there several times to get the soapy water to drain out when washing. Your install looks good !

 

[POINTCOVER]

Looks Great:beer:

 

[IOPNER]

Originally posted by 03redfiresnake
that looks really nice good work, I just like the mf rolled edge tips better, but thaey are chrome not ss.

I got some MF rolled, and they are SS. Not sure if I even saw a chrome set?:??:

 

[03redfiresnake]

Iopner, I went on magnaflow's website and see they don't even list any chrome tips. I know the model number is 35117 for the 4" 15 degree 2.5" id 18" slash cut tips. I could swear my receipt and another person on this forum had listed them as chrome. I hope they are ss -is there a way to tell ? I would assume the finish would have a little more "texture" ?

 

[IOPNER]

Originally posted by 03redfiresnake
Iopner, I went on magnaflow's website and see they don't even list any chrome tips. I know the model number is 35117 for the 4" 15 degree 2.5" id 18" slash cut tips. I could swear my receipt and another person on this forum had listed them as chrome. I hope they are ss -is there a way to tell ? I would assume the finish would have a little more "texture" ?

Those are the same one's that I got. They are SS, take a look on the inside of the tip.

 

[Brad]

I picked up the 4" rolled tips, don't mind the photoshopped plate:thumbsup:

 

[351MachOne]

Man those 4'' tips look awesome. I like the rolled tips on dark colored cars... They really stand out!

 

[03redfiresnake]

Brad, do you have a side shot showing how far they stick out from the valence. I think mine stick out too far.

 

[03redfiresnake]

OK, before everyone starts in on how dirty they are........they are clean now !!!!!!!!

 

[03redfiresnake]

Iopner, stainless ?

 

[WS6JJP]

subscribing...TTT