Turn your Mr.Fusion up and go faster.:thumbsup:Dreddstang said:UPDATE!!
Got the LX to the track last Friday night. Had kinda a crappy launch, but still went a new best (if only a little better).
I got a 1.73 60' bogging off the line and ran a 12.51 @ 109.8. MPH was a bit down, but I am betting that was my slight wheelhop/ bog at the line. Next T&T I'll be going for MUCH lower 12's, maybe better.
MACA 1/4 mile ET/MPH stats
- Thread starter Antex
- Start date
well I have a new best, not by much, but hey, I'll take what I can get. I'm happy with the trap speed though....
60ft: 2.305 :xpl:
1/4mi: 12.67 @ 121.66mph
On some very bald street tires....
Only mods are still the K&N, 2.93 upper and the magnaflows.
60ft: 2.305 :xpl:
1/4mi: 12.67 @ 121.66mph
On some very bald street tires....
Only mods are still the K&N, 2.93 upper and the magnaflows.
Last edited:
FISHTAIL said:
Mike, congrats on the PB :rockon:
Great MPH Mike!!! You improved by like 7 MPH here right?FISHTAIL said:
And Matt, looks like you'll be doing quite a bit of updating!!! Besides Fishtail, you have new PB's by Chris (snakestang, Big Jon! (Sprayed Snake), and of course yourself!!!!
Congrats fellas!!!!!!!!!!!!!!!!!:rockon:
xx
Last edited:
New personal best for me at ford fever
60' .... 1.85
1/8'.... 7.25 @ 104mph
1/4'.... 11.04 @ 133 on two yr old nitto drags.
i was so close to a 10 sec pass, but maybe next time. I only made two runs on sat. first was 11.77 @ 135mph and then my new best
60' .... 1.85
1/8'.... 7.25 @ 104mph
1/4'.... 11.04 @ 133 on two yr old nitto drags.
i was so close to a 10 sec pass, but maybe next time. I only made two runs on sat. first was 11.77 @ 135mph and then my new best
Got a new best today also! I was even closer to 10's HahaHa!
60' 1.65
1/8 7.13
mph 96.61
1/4 11.02
mph 132.28
60' 1.65
1/8 7.13
mph 96.61
1/4 11.02
mph 132.28
HOLY SH%$#@& you guys are killing me with your PB's congrats to all and whats up with all those tire in the air
Update my junk Matt//// 10.22 @ 141.05
6.60 @ 108.97 1/8th 1.60 60ft:xpl:
And I went a 10.44 on DR's to be 100% accurate
6.60 @ 108.97 1/8th 1.60 60ft:xpl:
And I went a 10.44 on DR's to be 100% accurate
Last edited:
F8LBITE said:
congrats on going a little faster, sorry to hear your 60ft times were low.
I know, I couldn't get the car not to bog or break. MPH is kick ass though!!!RedfireBeast said:
F8LBITE said:
I know, I couldn't get the car not to bog or break. MPH is kick ass though!!!
Congrats again you are making some serious power I just added you to the 2006 list of accomplishments...you need to add a K-member and solid now.
11.80 @ 118- Add me to the 11 sec Club
Went to Atco tonight and ran my personal best of 11.80@118 with a 1.71 60ft. Having gone to Atco a couple weeks ago and running a 12.17@117 I knew if I could heat up my drag radials enough I would be able to launch the car and obtain a good 60' ft. time. A couple weeks ago I was too afraid to brake a half-shaft so I didn't do an effective burnout and my 60ft. times were no better than 2.0. Tonight was different and it all came together. I launched at about 4k after a long burnout and ran my best time of the night. I have to admit not worrying about breaking something helped me run better. A couple of runs I had some wheel hop so I got out of it to live another day. Special thanks to Turbo Vnm and Jon Lund for the advice they shared with me. :burnout:
Went to Atco tonight and ran my personal best of 11.80@118 with a 1.71 60ft. Having gone to Atco a couple weeks ago and running a 12.17@117 I knew if I could heat up my drag radials enough I would be able to launch the car and obtain a good 60' ft. time. A couple weeks ago I was too afraid to brake a half-shaft so I didn't do an effective burnout and my 60ft. times were no better than 2.0. Tonight was different and it all came together. I launched at about 4k after a long burnout and ran my best time of the night. I have to admit not worrying about breaking something helped me run better. A couple of runs I had some wheel hop so I got out of it to live another day. Special thanks to Turbo Vnm and Jon Lund for the advice they shared with me. :burnout:
Last edited:
Ran a new best @ Capitol last Friday night. [email protected], stock eaton 2.93 upper pulley, 17" 315/35DR's, stock gears in the IRS. Wheel hopped like a mofo. 60' is killing me, best of the night was 1.91.
Johnny Vig said:
Why are you not affaid to break something all the sudden? My hardest launch of the night was @ 2500rpm because I worried about my 1/2 shafts. I had two runs that I had to let off because of wheel hop. : (
Matt, I need my times put on the list.
[email protected] 1.789 60ft, ported eaton w/ 2.8, IRS w/ 3.55
[email protected] 1.789 60ft, ported eaton w/ 2.8, IRS w/ 3.55
Last edited:
one of the slow snakes......1996 cobra that needs driver mod(or decent tires lol)
60'-2.276
330-6.058
1/8-9.036
MPH-83.62
1000-11.575
1/4-13.618
MPH-107.83
ST tires
race weight-3487 w/driver and 1/4 tank
4.10 gears, bolt-ons, N/A
60'-2.276
330-6.058
1/8-9.036
MPH-83.62
1000-11.575
1/4-13.618
MPH-107.83
ST tires
race weight-3487 w/driver and 1/4 tank
4.10 gears, bolt-ons, N/A
Last edited:
Just got to re-iterate what a good idea this was, Matt. It's nice to be able to quickly know how fast the MACA is :beer:
No Such Luck.....Cobra.12.607 @ 114.62 _ 2.103 _ _ 03 _ _ _ _ _Eaton 2.76 _ _ _ _ IRS _ _ _ 3.55 _ ST_V
Users who are viewing this thread
