M&H Racemaster Tires?s

[athlon551]

Thinking about putting these M&H Racemaster 325/40R18's on some True Forge Victories 11" but not sure if they would fit.

Would all I have to do is move the bump stop bracket in with the replacements......but it says it needs a 12" Rim on the site.

Also how do these wear...are we talking 5k or 10k mile tires....?


Thanks in Advance....


EDIT 325/40R18 NEW TIRE!

 

[GT500RedStripe]

What size/model tire?

 

[athlon551]

What size/model tire?

Edited....thanks...

 

[GT500RedStripe]

Racemasters are not recommended for the street. They are a great track tire. I drive mine short distances to the track or a show but no more. Otherwise, it is M/T for the street.

Write John/Tech at M&H about rim range to be sure. He can also tell you about street use.

 

[VNMOUS1]

Anything over 11" is gonna rub the lip without removing the bumps, dust covers and have a custom offset.

325/50/15 are 11.1"

I had red paint on the sidewalls every pass. Thank goodness they are already rolled!

PLEASE REACH ME VIA EMAIL AT [email protected] AS OPPOSED TO PM. THANKS.

 

[stkjock]

they fit - car is lowered with FRPP "K" springs

18 x 10s - I use them 24/7/365 - I spoke to John at M&H about the rim size and he said it was ok on a 10" so on a 11" you're fine.

 

[rlhay2]

I have these same tires, 325/40-18 on widened to 11" stock 07 wheels.
With the bumpstops removed I have no issues at all.
But as stated, these tires can be driven on the street but they are not street tires.
Soft sidewalls, low tire pressure and very soft compound.

 

[19COBRA93]

Soft sidewalls, low tire pressure and very soft compound.

Sounds like a great tire for a high HP car. I might just look into a set of these. My car sees limited street use these days.

 

[stkjock]

I run them with 32 psi most of the time unless I am looking for trouble....

 

[sedanman]

I have them on a factory 9.5 rim they bulge but fit, they work really well. My car is a perfect weather only car but they are the only tires I have for it, and have taken a 5hr each way drive on them before. Stkjock do you have any rubbing with the k springs I plan to do them this winter.

 

[Sinovac]

I have the M&H 325/40R18 on my 2008 with the stock wheels widened to 10.5". Car is lowered with FRPP K springs. Fit perfect. I too use them all the time.

 

[manOwar]

I ran mine with 27psi. With the street tune making around 750, they really hooked well on the street. With 11-13psi at the track, it would dead hook. I've bent both the stock and Moser axles with a 275's... M&H are the best DR out there IMO....

 

[Poppacapp]

I ran mine with 27psi. With the street tune making around 750, they really hooked well on the street. With 11-13psi at the track, it would dead hook. I've bent both the stock and Moser axles with a 275's... M&H are the best DR out there IMO....

I am thinking of going with a set of 18x9.5's with a set of M&h x275 tires. My 20" 555r's are nice for street daily driving, but need something with more bite at the track.