Low dollar solutions for limp mode.

SCT2003

2012 3.7 & 1986 NOTCH
Established Member
Joined
Nov 5, 2006
Messages
974
Location
Los Angeles
Thanks Jimmy..

Does anybody have more detailed pictures of the "wider/deeper air dam mod"???

Front and back views...I may try attacking this project in the morning???

Thanks...

Later...Dave
 

black-plasma

Active Member
Established Member
Joined
Jul 5, 2007
Messages
1,029
Location
MO
Thanks Jimmy..

Does anybody have more detailed pictures of the "wider/deeper air dam mod"???

Front and back views...I may try attacking this project in the morning???

Thanks...

Later...Dave

+1 or even there boxed in radiator.
 

racebronco2

Well-Known Member
Established Member
Joined
Sep 23, 2003
Messages
7,268
Location
palmdale, ca
Thanks Jimmy..

Does anybody have more detailed pictures of the "wider/deeper air dam mod"???

Front and back views...I may try attacking this project in the morning???

Thanks...

Later...Dave

+1 or even there boxed in radiator.

There are a few old threads and pictures, just go thru the old threads. I posted up some pictures but deleted them a while ago.
 

Jimmysidecarr

Semi user friendly
Established Member
Joined
Sep 15, 2003
Messages
14,395
Location
Spring, Texas, United States
Thanks Jimmy..

Does anybody have more detailed pictures of the "wider/deeper air dam mod"???

Front and back views...I may try attacking this project in the morning???

Thanks...

Later...Dave

Sorry for the back from the dead bump but this thread has got some good stuff and I would like to finally add the air damn pic to it.
Please note that this air dam is trimmed about an inch too short at least. I will be doing up another that will be two inches lower than this one. When you hit stuff it just bends and snaps back anyway, so make it too deep first and then drive it some before you trim it to the depth you want.


P4090006.jpg
 

a1yola

1998 Cobra #5061 FALEEN
Established Member
Joined
Mar 22, 2009
Messages
829
Location
Bay Area, Cali
Jimmy, is your "custom" air dam mounted on top of the stock piece or did you just replace the stock one completely? Also, I see the bolts on the side but not on the radiator support...is your air dam somehow mounted onto the radiator support? Did you bolt it in or did you use the plastic push pins like the stock air dam uses?
 

Users who are viewing this thread



Top