03 cobra motor and trans swapped 03 Mach 1 with a 3.6 KB mammoth blower. Bought motor and trans used with the blower already installed so I have no experience on installing it,dropped old K member removed stock Mach motor and bolted on termi..that’s the long and short of it.
looks like a nightmare to remove injectors,but a failed fuel filter leaves me no choice. It appears that the intake plenum has to be removed to get at the rear drivers rail bolt and injector? It also appears that to remove plenum there are 4 bolts from the rear securing it,which look like to get at the lower drivers bolt the motor will need to be dropped? Is that correct or am I missing something? Thanks in advance
looks like a nightmare to remove injectors,but a failed fuel filter leaves me no choice. It appears that the intake plenum has to be removed to get at the rear drivers rail bolt and injector? It also appears that to remove plenum there are 4 bolts from the rear securing it,which look like to get at the lower drivers bolt the motor will need to be dropped? Is that correct or am I missing something? Thanks in advance