Anyone have any ideas?
KB 2.2 w/BAP blowing fuel pump fuse @ WOT
- Thread starter anc2514
- Start date
Which BAP do you have and are you sure you are using the correct size fuse? Is it turned all the way up?
Last edited:
The fuse is correct, 20 amp, i dont know the rest of the info. The owner before me installed everything.
It is a 30a fuse, replace it to that and see if it still occurs because you should have the 30a in place of the 20a right now!
my buddies car did the same thing and was told he needed the wiring upgrade on the bap.
Do you have the BAP installed "BEFORE" or "AFTER" the FPDM ??? Is this a NEW install ??
Under the hood in the fuse panel or the in-line fuse for the BAP?
Not sure. How can i find out? It was on the car when I bought it a couple of months ago.
Last edited:
Under the hood, location #14. Replace it with a 30a fuse.
Sweet man, thanks! Hope it works. No wires will catch fire, right?
No, this is part of the installation. Should fix your issue!
Thanks brutha! We'll see how she runs tomorrow.
There should be 2 30amp fuses. One @ the BAP power line which is in the trunk and a 30amp in #14 under the hood.
Thats what i got now, thanks guys!
you should be okay now.
Pre FPDM is green/yellow wire, post is brown/pink.
How is it wired in, are any metal wiring ends exposed? Which fuse is blowning the underhood one or the BAP fuse?
How is it wired in, are any metal wiring ends exposed? Which fuse is blowning the underhood one or the BAP fuse?
I think I have it fixed if I follow what the others have told me. I have replaced the under hood, fuse panel #14 location fuse with a 30amp, from a 20amp. The one in the trunk is 30amp.
Users who are viewing this thread
