Was wondering with just a 2.76 pulley, cai, and full exhaust if I need to get new plus asap or will it be fine with the stock ones?
Just got a 2.76 sc pulley put on. Do I need colder plugs?
- Thread starter Machx2
- Start date
Change the plugs. I went through the same thing. Just did the 2.76 and she rattled. After changing the plugs all was good again. Try some NGK TR6 plugs. Inexpensive and a great plug for our cars.
+1 NGK TR6
TR6's are $18-25 at most speed shops.
Change them, I just put my pulley on left the stk plugs and at WOT it would studer,after putting the NGK TR6 runs like stk but with alot more power and no studering actually u have to change them if not you will be blown out spark in boost. Just get the TR6s there good up to 16-17lbs TR7s are for beyond that.
Last edited:
Yes tr6ix
When I had that combo I ran the stock plugs/stock gap and put down 457rwhp/477rwtq:shrug:
It's a gap issue, if you want to run higher than stock boost levels the gap must be reduced to prevent spark blowout.
I have mine down to 0.35 or so how far down can I go, is lower better cause I get alittle studer still in high boost prob some blowout.
Yeah could be, try gapping closer to .030-.032. How much boost are you running and which plugs? And how old are the plugs?
Just put them in yesterday & there NGK TR6s Ill try .32 Im seeing bout 13-14lbs of boost.
Last edited:
That should work :beer:
Users who are viewing this thread
