It is on Baby!!!Prochager Rocks the Dyno
Just finished dynoing a 03 cobra with the New PROCHARGER P1SC2 kit. Let me tell you what it is a Bad mother!! I ran it with both pullies 3.4 made 17psi and 3.20 20psi. Put it this way the car made over 660hp SAE and 550 torque @ 20psi. There is more left in it but the owner got a little uneasy about the whole thing. An artical will be out in 5.0 in the near future to give you more specifics but it is all over for the KB cars. Let me tell you, I have a KB 03 makein 600 and its lights out!!!! The inlet air temps are remarkable and fuel consumption. We made 630hp with stock injectors, swapped them out for some 55 and smaller pulley. 3.2. car made almost 700 uncorrected.
Brian Heron with Apten Performance has completed all the tuning for Procharger on this kit and can not release dyno sheets with out their approval. All the info will be public knowledege once artical in 5.0 comes out. we will be testing the 3.0 pulley once we finish the new fuel pump driver. Beyond the 700 mark will be made without trouble once fuel system gets upgraded.
Contact Apten Performance for details..[
Just finished dynoing a 03 cobra with the New PROCHARGER P1SC2 kit. Let me tell you what it is a Bad mother!! I ran it with both pullies 3.4 made 17psi and 3.20 20psi. Put it this way the car made over 660hp SAE and 550 torque @ 20psi. There is more left in it but the owner got a little uneasy about the whole thing. An artical will be out in 5.0 in the near future to give you more specifics but it is all over for the KB cars. Let me tell you, I have a KB 03 makein 600 and its lights out!!!! The inlet air temps are remarkable and fuel consumption. We made 630hp with stock injectors, swapped them out for some 55 and smaller pulley. 3.2. car made almost 700 uncorrected.
Brian Heron with Apten Performance has completed all the tuning for Procharger on this kit and can not release dyno sheets with out their approval. All the info will be public knowledege once artical in 5.0 comes out. we will be testing the 3.0 pulley once we finish the new fuel pump driver. Beyond the 700 mark will be made without trouble once fuel system gets upgraded.
Contact Apten Performance for details..[
Last edited: