is s single 88mm too big!!

[sparepartsshee]

is s single 88mm too big!!

--------------------------------------------------------------------------------

hey guys new to the site but my question is, will a single 88mm turbo be to large or hard to spool up on a built motor, i think its a t3 flange but it might be t4, what do u guys think!!

 

[Juiced46]

YES! for a 1.8L honda.......

Whats the application??

 

[sparepartsshee]

88mm turbo

its a 4.6 keith craft fully built, just like the 03 04 cobra, except its a 2v, i have a d1 on it now. with a tko 600, makes 520 rwhp now, will it spool up or do i need a 76

 

[Greg@RET]

http://www.modularfords.com/forums/showthread.php?t=109611

 

[TRBO VNM]

gotta be a t4 or 6. I can't see an 88 being a t3. with an automatic it may be ok, but not a manual unless you have a larger displacement motor than what you have.

 

[sparepartsshee]

88mm turbo

well it's bored .20 over, so 284 ci maybe! and yes, its a t4!

 

[KingCobra10Sec]

Over 900RWHP on T88, I almost went with that one. I have a 281 stroked to a 302. But I didnt want to spray it to get into higher RPM's.

 

[Modular Racing]

A 88mm is great for a medium HP 03/04 Cobra, the one we built for X2C Motorsports back in 03' made 866rwhp with a basically stock motor, the 88mm on the 2V in the link above is a T6 flange, (we know, we built the motor) that 88mm would still however be considered a mid frame 88 (as opposed to a large frame)

 

[SVTboy]

If its a t4 your in for some serious surge.....