intercooler problem

CUINMYREARVIEW

New Member
Established Member
Joined
Jun 7, 2009
Messages
71
Location
maryland
anyone had there intercooler stop working just trying to figure out how it really operates with the relay if i jump it through the relay i can get it to come on just trying to get the lowdown thanks.
 

03cobra#694

Good Guy
Super Moderator
Joined
Nov 12, 2003
Messages
62,656
Location
SW FL.
Just jump it,it should turn on and circulate the water in the res.
EDIT:Added jumper wire pic for ya.
ICJumper.jpg
 
Last edited:

03yellow

New Member
Established Member
Joined
Jul 30, 2004
Messages
3,145
Location
texas
If you think its having an issue then the pump is more than likely going out. Replace it and be done with it. I know my Hp #s were down because my pump was failing.
 

svtcop

Pain Don't Hurt
Established Member
Joined
Jul 12, 2008
Messages
4,237
Location
Ohio
What kind of wire and connectors are you guys using to jump the ic?

any copper insulated wire ~12 to 14ga and male ended connectors will work

I wouldn't take a chance if it may be failing though, just replace it.

The jumper is more for filling/changing the IC fluid.
 

CUINMYREARVIEW

New Member
Established Member
Joined
Jun 7, 2009
Messages
71
Location
maryland
ic pump

thanks guys for all the info the pump works if i get up under the car an push up on the connector at the pump but only if i have the jumper wire hooked up but my buddys mystic cobra his ic pump come on as soon as he turns the key on what i am trying to figure is how it operates stock like how its cycle works .
 

03cobra#694

Good Guy
Super Moderator
Joined
Nov 12, 2003
Messages
62,656
Location
SW FL.
^^^The pump wont turn on till it reaches a certain temp.That`s why you use the jumper wire to test it.
 

Users who are viewing this thread



Top