I just got my solid axle, have a coup questions

[lachj1]

1. Do I need a tranny side ds yoke from a gt to get the cobra driveshaft to fit?

2. My cobra abs wiring will hook right up to the gt abs on the axle?

3. If I'm going to use the cobra brakes I need the brackets from a 97' cobra, I know that part. But is the bracket that thick peice of steel that is bolted on both ends of the axle? and/ or there is also a stamped peice of steel that is held by a u shackle (like an exhaust clamp) and it mates right up with thick steel that the gt brakes are bolted to.
I got the part#'s from this site f422-2c100-b left and rights. Are these the stamped steel parts or the heavy steel plate that bolted solid to the end of the axle?

4. Cobra Emergency brake cable will fit?

 

[bassin247]

1. You need the flange that mounts to the differential. I swapped my flange with the guy I got my solid from. We need to buy new U joints

2. You need GT abs sensors. They plug into the clips thats under the back seat.

3. You need to metal peice that the caliper mounts to and that peice mounts the the axle. Call it what you want.

4. Yes