I think I have a bad wheel bearing and am wondering on how to proceed. I have printed out how to on replacing rear wheel bearing, but pics don't come up, and have read much out here about axle and wheel bearings, and importance of axle nut torque and replacing it. I have a buddy that's getting an air gun to help. Not sure what tools we may need either. I did read where one guy was just going to take off the entire "knuckle" and take it in and have someone press in new bearings. This sounds like the way I might want to go. My buddy will probably want to do ALL of it to help save me money which is cool, I just don't want us to get any more frustrated than we have to.
Anyway, in the writeup on replacing wheel bearing it says to remove knuckle first thing. Then it says see writeup on how to do this. Howevr that writeup could not be found. So anyone wanna take a stab at briefly explaining what needs to be done to just do that. Thanks in advance. Adam (not :rolling: )
Anyway, in the writeup on replacing wheel bearing it says to remove knuckle first thing. Then it says see writeup on how to do this. Howevr that writeup could not be found. So anyone wanna take a stab at briefly explaining what needs to be done to just do that. Thanks in advance. Adam (not :rolling: )