I just installed the DDM tuning slim ballast kit on my car. Its a pretty simple job. An hours worth of time tops. So lets get to it shall we.
First Im not gonna insult anyones intelligence by telling you how to removed your headlight bulbs. Thats to easy. Ill show you what I did and how I placed everything.
Heres the package that everything came in. These Ballasts are small!!
I pulled out my airfilter box, pulled the battery, and battery tray to get some extra room to manuever around and try and find a happy little home for these. I bought some double sided 3M squares from Walmart and placed 4 on the Ballast and 2 on the ignitor.
After about 45 mins of thinking and shuffling I finally decided on a spot. This is the passenger side.
The drivers side wasnt to bad. Took me about 5 mins to figure this side out.
Here is the clearances for both with the battery and the airfilter installed.
Airfilter side
Airfilter box does not touch the ballast what so ever.
Placing the ballast's was the hardest part of the whole thing. Now to the bulbs. I had to unpin the blue plug cause the plastic case that it came in wouldnt go over. No biggie. After its off I put the pins back in. They just push out no prob.
After that I put the black backing that locks the bulbs in onto the wire harness.
Place them in and finish it off.
The rest is a piece of cake. All you gotta do is plug everything back up. You cant mix anything up. Its a pretty plug and play setup. Here is some comparison shots.
I swear its like night and day. SOOOO much better at night. Hope this helps anyone out look at getting a set. I payed 70 bucks shipped to my door for these. If you guys got any questions feel free to ask. Ill do my best to help you guys. Enjoy. :beer:
First Im not gonna insult anyones intelligence by telling you how to removed your headlight bulbs. Thats to easy. Ill show you what I did and how I placed everything.
Heres the package that everything came in. These Ballasts are small!!
I pulled out my airfilter box, pulled the battery, and battery tray to get some extra room to manuever around and try and find a happy little home for these. I bought some double sided 3M squares from Walmart and placed 4 on the Ballast and 2 on the ignitor.
After about 45 mins of thinking and shuffling I finally decided on a spot. This is the passenger side.
The drivers side wasnt to bad. Took me about 5 mins to figure this side out.
Here is the clearances for both with the battery and the airfilter installed.
Airfilter side
Airfilter box does not touch the ballast what so ever.
Placing the ballast's was the hardest part of the whole thing. Now to the bulbs. I had to unpin the blue plug cause the plastic case that it came in wouldnt go over. No biggie. After its off I put the pins back in. They just push out no prob.
After that I put the black backing that locks the bulbs in onto the wire harness.
Place them in and finish it off.
The rest is a piece of cake. All you gotta do is plug everything back up. You cant mix anything up. Its a pretty plug and play setup. Here is some comparison shots.
I swear its like night and day. SOOOO much better at night. Hope this helps anyone out look at getting a set. I payed 70 bucks shipped to my door for these. If you guys got any questions feel free to ask. Ill do my best to help you guys. Enjoy. :beer: