how far will 80# take me with E85?

[y2k2gt]

Car made on the dyno 475rwhp through the C4 at 12psi and was trapping 131-132mph at the track. I dont put it on a dyno any more. I just data log and adjust as I need.
It trapped 137mph at 18psi and calculator said the converter was slipping 18%.
I'll be going back to track real soon with a new TH400 setup.

 

[SSeatr]

Okay so im looking at the flow rates for my fuel pump.so with my 80lb injectors and the fuel pump i have whats the max fuel press I could run? I am trying to figure all this out as I go.

Say with a 55psi base could it handle 800?

all @ 12v
30psi 1300lb/hr
40psi 1200lb/hr
50psi 1100lb/hr
60psi 1000lb/hr
70psi 900lb/hr
80psi 800lb/hr

 

[99cobrajn]

DeatschWerks 95lb/hr Injectors / Ford Mustang GT 2005-10 - Modern Automotive Performance

I got these comming this week. not from this place but the 105 by dw.

 

[04mach17]

DeatschWerks 95lb/hr Injectors / Ford Mustang GT 2005-10 - Modern Automotive Performance

I got these comming this week. not from this place but the 105 by dw.

Let us know how they work out. How they tune! I am building my twin screw setup and looking to make 800+ and am worried the 80lbs injectors won't be enough and was thinking going d-werks 95lb but I have heard ba things about drilled injectors.. Take a pic of the tips when u get them so we can see how nice they were drilled.. Think the 95s start life as like a 42lb injector till they drill and add a larger coil to make them flow 95lb!

 

[04SilverSerpent]

I would be curious on these as well...I have a few months before I purchase some injectors for my e85 setup. As it stands right now, I'm just going to buy some 80's for mysetup.

 

[GodStang]

Let us know how they work out. How they tune! I am building my twin screw setup and looking to make 800+ and am worried the 80lbs injectors won't be enough and was thinking going d-werks 95lb but I have heard ba things about drilled injectors.. Take a pic of the tips when u get them so we can see how nice they were drilled.. Think the 95s start life as like a 42lb injector till they drill and add a larger coil to make them flow 95lb!

If you have a capable tuner than you should be fine with 80s. It has been done many times before. I will be doing it also.

Okay so im looking at the flow rates for my fuel pump.so with my 80lb injectors and the fuel pump i have whats the max fuel press I could run? I am trying to figure all this out as I go.

Say with a 55psi base could it handle 800?

all @ 12v
30psi 1300lb/hr
40psi 1200lb/hr
50psi 1100lb/hr
60psi 1000lb/hr
70psi 900lb/hr
80psi 800lb/hr

If you have a capable tuner than you should be fine with 80s.

 

[SSeatr]

If you have a capable tuner than you should be fine with 80s. It has been done many times before. I will be doing it also.



If you have a capable tuner than you should be fine with 80s.

yea i spoke with my tuner, he said 800 with e85 shouldnt be an issue being my pump is so large.