help with ride height

[mdrc347]

I recently purchased a wrecked 04 cobra with a tubular k-member and adustable coil overs in front and a straight axle with adjustable ride height in the rear. The car sits ridicuosly low. I can't even get low profile hoist arms under it. Anyhow, I want to set the ride height back to stock and go from there. Does anyone know where to find ride height specs, or have them. If not, if you have a 03-04 cobra, could you possibly measure it and post it here or pm me. It would be a big help. Thanks. The car is minus front and rear bumper cover for now, so I can't measure to those. The best place to reference would be the front and rear bumpers themselves. But, I would settle for a measurement directly behind front tires to side ground effects, and directly in front of rear tires to side ground effects. Obviously, stock ground effects are also required. Thanks in advance.

 

[svt2ner]

ground to fender measuring directly center of the wheel stock height is around 27.5 inches. Should get you close enough to what you want.

 

[mdrc347]

thanks, but is this for the front or rear or both?

 

[03cobra#694]

thanks, but is this for the front or rear or both?

Both,he`s pretty close.I have the exact #`s written down at home from when I lowered mine and can post them later if nowone else has.

 

[mdrc347]

sounds good. otherwise, I will use the 27.5" figure.

 

[03cobra#694]

Bottom of the fenders
Front 27''
Back 27-3/4''

 

[mdrc347]

Thanks. just in time too.