I have BMR drag springs, upper and lower adjustable control arms, relocation brackets and pan hard bar.
Lower control arms are set to bottom hole and I'm at about -1.5 pinion angle.
I just replaced ring and pinion due to wheel hop. I haven't been to the track yet but on the street from a roll it spins in first and second and I'm seeing that I have wheel hop. I was running 12psi in tires and I just raised to 18psi hoping that might helpbut it hasn't helped. I have track pack and I usually run suspension in normal mode because I noticed sport mode stiffened front also, I figured I would get better launch with the front being a little softer.
Thanks in advance for any help..
Lower control arms are set to bottom hole and I'm at about -1.5 pinion angle.
I just replaced ring and pinion due to wheel hop. I haven't been to the track yet but on the street from a roll it spins in first and second and I'm seeing that I have wheel hop. I was running 12psi in tires and I just raised to 18psi hoping that might helpbut it hasn't helped. I have track pack and I usually run suspension in normal mode because I noticed sport mode stiffened front also, I figured I would get better launch with the front being a little softer.
Thanks in advance for any help..