made a racecar!! check it out ! ^_^Sell the car and cut your losses
It’s highly modified and sounds like it was bought sight unseen, unfortunately this is the chance you take when doing so.
made a racecar!! check it out ! ^_^Sell the car and cut your losses
It’s highly modified and sounds like it was bought sight unseen, unfortunately this is the chance you take when doing so.
made a racecar!! check it out ! ^_^
What track are you running at? I wouldn't mind seeing the car make a pass.Forgot to update everyone!! alot has happened the car made 12 passes at the track or so on the stock m122 with the built motor it ran a flat 8 . with me 60fting like a twat 2-3 seconds. Now we are underway!!
we hit greer and shady side. I plan on hitting english mountain and bristol's 1/4 soon!! the 1/8th just stops right before the car really opens up.What track are you running at? I wouldn't mind seeing the car make a pass.
Sent from my [mind] using the svtperformance.com mobile app
Thanks boss its been a damn long road and now the gen 3 is installed and many other things are going on subframe ect... THe car already last year i installed full viking crusaders. I bought Bj mccarty's Drag setup. Gonna try to make a real pass not on a street tire.Looks great. Glad you got it back up and going.
Let me know when you head out. Bristol is a long drive. But I've never been.we hit greer and shady side. I plan on hitting english mountain and bristol's 1/4 soon!! the 1/8th just stops right before the car really opens up.
Had no choice either it sits and rots or I do something we only live once and I see everyone having so much fun figured what the hell lets throw some money at it and make it go fast.Congrats @Tighteyes! When you go this thing I know how much of a bummer it was when you found out the bottom end was wasted. Looks like you turned her into a monster.
I really wish I would of seen your post before getting this far into the build , I would of loved to buy that setup you had. I hope the bogarts look good.... ^_^Hmmmmm, Bogarts
Good luck.
-J
Valves and guides can be replaced. Are your heads cracked? It would seem someone could rebuild them for a lot less than the route you're going.
The heads actually ended up drivers side warped 10%, someone used them to mock up some kind of special valves for their race car. =/ Sucked but so far the car has been rolling around about to change pulley to lose boost so i can see what it feels like with a gen3.I'd shop that $3,800 price tag. Nothing wrong with stock valves and a good multi angle valve job. I don't really care what you do, but if you're trying to trim the cost of this rebuild, there are ways to do it and still get rid of the primary achilles' heel in this motor, the rods. Your money, your choice.