Got my car dynoed!!!

[ls1eater]

I went out to coastal today and was happy with the results......
2004 cobra
Mods: -2.93 lightning pulley(With a Tune of course)
-JLT CAI
-Magnaflow catted xpipe w/Bassani catback

469 rwhp @ 6000rpms
478 rwtq @ 3600rpms

 

[white98snake]

nice numbers, throw a 50shot of spray and hello 600rwtq lol

 

[MustangV8]

Nice

 

[booricua]

those are good ###

 

[P_RsSVT]

Nice numbers, were they SAE?

 

[PLATIADO]

Nice numbers, were they SAE?

+1

 

[CobraBob]

I'm guessing those are STD numbers. Very high to be SAE with a 2.93 upper only. Should be in the 440-455rwhp range with those mods. Nice numbers for sure, regardless of whether they are STD or SAE. :rockon:

 

[Rice Eatr]

Very nice numbers.

On a side note, factory pulleys actually measure smaller then the advertised diameter. The pulleys are measured using a small diameter ball that rests between the ribs of the pulley. I would imagine that the L' pulley actually measures around 2.88 or 2.89. I had a Harley pulley that was advertised at 3.25" but actually mic'd a little over 3.16" on average.

 

[SVTkel]

Wow - with a 2.93 pulley

 

[ls1eater]

They are sae numbers everyone was surprised how good it made....maybe I have a little factory freak........IVe measured the pulley and it was 2.93"

 

[esqeddy]

sweet!

 

[trey193]

Coastals dyno tends to read higher than most. Several guys have dynoed and thought they had factory freaks, they got a factory freak of a dyno. If you are into numbers compare it another dynojet.

 

[unit213]

If you are into numbers compare it another dynojet.

You mean run it at the track.

 

[Crowley]

Nice .. I bet it feels really good!

Crowley

 

[Tucker]

I dynoed exactly the same with a 2.93 and Pre port. 468 RWHP SAE.
Sounds right on to me.
Great job.
Jay

 

[DitchTehFish]

With your mods, those are "freak" numbers for sure.

 

[PLATIADO]

I went out to coastal today and was happy with the results......
2004 cobra
Mods: -2.93 lightning pulley(With a Tune of course)
-JLT CAI
-Magnaflow catted xpipe w/Bassani catback

469 rwhp @ 6000rpms
478 rwtq @ 3600rpms

I got very similar #s as you did, I went to the same place my mods are 2.80 maggie catback pro-chamber and FIPK and my #s were 467.1 power @ 6300 and 483.0 TRQ @ 3150 2 weeks ago

 

[ls1eater]

I got very similar #s as you did, I went to the same place my mods are 2.80 maggie catback pro-chamber and FIPK and my #s were 467.1 power @ 6300 and 483.0 TRQ @ 3150 2 weeks ago

Have you had a chance to run your car????? Like to know where I should be at because it will be a while before I can get to the track.......Im thinking 11-5.11-7 @ 118-120

 

[Tucker]

I ran 11.8's @ 122 mph with a 2.93 and 468 RWHP.

It can be done.
Jay

 

[URDONE]

Very nice numbers.