• Welcome to SVTPerformance!

FS: MGW Gen 2 and Blowfish shifter bracket/driveshaft loop

Discussion in 'Engine/Drivetrain' started by Cman01, Oct 6, 2019.

  1. Cman01

    Cman01 hello Established Member

    Messages:
    2,087
    Joined:
    May 25, 2012
    Location:
    Toronto
    Inked-IMG-20191005-145437-LI.jpg
    IMG-20191005-145417.jpg
    IMG-20191005-145338.jpg
    IMG-20191005-145401.jpg
    IMG-20191007-132812.jpg

    I am selling a MGW Gen 2 shifter and Blowfish bracket together for GT500. These parts were on my 13 GT500 for only a few months and removed yesterday since the car is sold. They are in like "new" condition. The shifter has the standard shift handle that accepts the stock 10-14 shift ball (M10x1.25).

    As shown in the pics above, the blowfish bracket has been modded to keep the Gen 2 shifter sitting in the OE location but relocating the rear shifter mount to the BF bracket. The BF bracket also serves as a driveshaft loop so you get safety along with a kickass shifter setup for your GT500 (bottle of oil not included obviously, used to hold shifter in the proper location for viewing purposes). ;)

    This setup has been tested numerous times during high rpm 1-2 shifts up to 6500rpm with NO issue, if you have a proper tranny without synchro problems you will also have the same results. Search and read my "murder my blowfish bracket" thread to get all the details on what was done, all parts are included with the purchase.

    I am not separating these two parts as the rear shifter mount is precisely located on the BF bracket. Everything will install precisely on your car like it was on mine with the proper results for you.

    US$570.00 shipped anywhere in Canada and 48 USA with tracking.

    Paypal accepted (friend request only or add 3%, sold LOTS of stuff here no issues so save the 3% for you to use elsewhere).

    PM, call or text 416-919-1769 for more info

    Tony
     
    Last edited: Oct 9, 2019
  2. 03cobra#694

    03cobra#694 Want to play a game? Staff Member Super Moderator

    Messages:
    49,658
    Joined:
    Aug 12, 2008
    Location:
    SW FL.
    Pictures need to appear in the thread, and you need your username on a piece of paper, thanks.
     
  3. Cman01

    Cman01 hello Established Member

    Messages:
    2,087
    Joined:
    May 25, 2012
    Location:
    Toronto
    I will PM u this aftn.

    I'm having trouble uploading pics using the uploader here which is why I did what I did to have pics here thru a link.

    We'll discuss later. Please don't delete the thread.

    edit: PM sent to Super Moderator
     
    Last edited: Oct 7, 2019
  4. 03cobra#694

    03cobra#694 Want to play a game? Staff Member Super Moderator

    Messages:
    49,658
    Joined:
    Aug 12, 2008
    Location:
    SW FL.
    See if you can just copy and paste like I just did.

    IMG-20191005-145338.jpg
     
  5. Cman01

    Cman01 hello Established Member

    Messages:
    2,087
    Joined:
    May 25, 2012
    Location:
    Toronto
    I figured it out on my new photo upload site...…………..all good?????

    if it's good can you delete the replies after post #1 to keep the ad clutter free?
     
  6. Robert M

    Robert M 800 HORSE FUN!! Established Member

    Messages:
    8,427
    Joined:
    May 15, 2003
    Location:
    Sunny, Fla.
    Did you have a H-pipe or other exhaust in the area behind the cross member or does the BF take up that space? or is the exhaust, X, H etc. below the BF?

    Thanks, Robert
     
  7. Cman01

    Cman01 hello Established Member

    Messages:
    2,087
    Joined:
    May 25, 2012
    Location:
    Toronto
    I had orx on, BF bracket sits above the stock catted h or any other h or X pipe and doesn't interfere with anything related to the exhaust.

    Search for that thread you'll see the placement of the bracket to the exhaust.

    Just to add setup fits GT500 07-14.
     
  8. Cman01

    Cman01 hello Established Member

    Messages:
    2,087
    Joined:
    May 25, 2012
    Location:
    Toronto
    Don't have my Shelby anymore and I don't need this stuff sitting around doing nothing, and I know lots of u can use it on your cars so contact me and get this stuff on the way to you.

    Not giving this stuff away for nothing since it's practically brand new but I'm sure a fair price can be worked out.

    Let's get it done.
     
  9. borkowski059

    borkowski059 New Member Established Member

    Messages:
    12
    Joined:
    Nov 19, 2011
    Location:
    Pa
    Still available?
     
  10. Cman01

    Cman01 hello Established Member

    Messages:
    2,087
    Joined:
    May 25, 2012
    Location:
    Toronto
    Yes, still available.
     
  11. Cman01

    Cman01 hello Established Member

    Messages:
    2,087
    Joined:
    May 25, 2012
    Location:
    Toronto
    Items are now SOLD!!!

    thank u fellow SVTP member!!
     

Share This Page