2.3 Whipple
60 Lb injectors
Ford GT pumps
Fuel system wire upgrade
6lb lower
Metco pulleys
17X10.5 rims in rear
MT 315 drag radials
26 spline input shaft
spec stage 3 clutch
K/B t-body
Mafia extender
UPR caster camber plates
Ford Motorsport Bullet rear springs
Tokico rear shocks
UPR K member with coil overs
cooling mod
JLT intake
Steeda Tri-Ax shifter
solid rear with 3.73's (rear out of 04 Mach)
31 spline axles
D/S loop
Steeda control arms
Steeda Adj. upper control arms
BAER Eradispeed front and rear rotors
Hawk HPS front and rear pads
Heat exchanger
Gords Intercooler Heat Exchanger-Grille Screen
JBA mid length headers
Steeda X pipe with high flow cats
Stinger exhaust
Kenny Brown subframe connectors
Ford Racing coil covers
20% tint
Rear diff. cover
Underhood painted
Sure that I am missing some things! Have many of the original parts. Also ALL CERTIFICATES, RECEIPTS, WINDOW STICKER, ETC.
Dyno pull was with 19.2 lbs boost. With a pulley change and 24 lbs, terminator with same mods make around 700 rwhp. Tuned by Excessive Motorsports. This car is a 10 from front to back top to bottom. Only been washed one time to put high end polish and glaze. Never raced, tracked or driven in the rain. Time for Someone else to enjoy her. Lowered $28,500.
Please let me know if any questions. Email me at [email protected]. Thanks, Shane
rmunyon's Library Slideshow
https://www.svtperformance.com/foru...2/?temp_hash=9d0dd02ffa0acef80b861ccfae97642a
60 Lb injectors
Ford GT pumps
Fuel system wire upgrade
6lb lower
Metco pulleys
17X10.5 rims in rear
MT 315 drag radials
26 spline input shaft
spec stage 3 clutch
K/B t-body
Mafia extender
UPR caster camber plates
Ford Motorsport Bullet rear springs
Tokico rear shocks
UPR K member with coil overs
cooling mod
JLT intake
Steeda Tri-Ax shifter
solid rear with 3.73's (rear out of 04 Mach)
31 spline axles
D/S loop
Steeda control arms
Steeda Adj. upper control arms
BAER Eradispeed front and rear rotors
Hawk HPS front and rear pads
Heat exchanger
Gords Intercooler Heat Exchanger-Grille Screen
JBA mid length headers
Steeda X pipe with high flow cats
Stinger exhaust
Kenny Brown subframe connectors
Ford Racing coil covers
20% tint
Rear diff. cover
Underhood painted
Sure that I am missing some things! Have many of the original parts. Also ALL CERTIFICATES, RECEIPTS, WINDOW STICKER, ETC.
Dyno pull was with 19.2 lbs boost. With a pulley change and 24 lbs, terminator with same mods make around 700 rwhp. Tuned by Excessive Motorsports. This car is a 10 from front to back top to bottom. Only been washed one time to put high end polish and glaze. Never raced, tracked or driven in the rain. Time for Someone else to enjoy her. Lowered $28,500.
Please let me know if any questions. Email me at [email protected]. Thanks, Shane
rmunyon's Library Slideshow
https://www.svtperformance.com/foru...2/?temp_hash=9d0dd02ffa0acef80b861ccfae97642a
Attachments
-
5FEF89F6-772B-4799-AD25-0DED9FF7A370.jpeg123.2 KB · Views: 2,608
-
F68BCF2D-D466-45D4-8C46-E945F40EB27B.jpeg115.3 KB · Views: 1,996
-
4A21359F-4864-4C62-8B07-1F871DC60F42.jpeg128 KB · Views: 1,967
-
320D88AB-3F0C-4AC3-ABB6-30F60A86FE8B.jpeg152.7 KB · Views: 2,004
-
6D2F6431-3C3F-415D-93E3-AC3B55460E58.jpeg150.9 KB · Views: 1,985
-
E23FE9EF-E397-4520-A327-2B625EBCC3EB.jpeg77.8 KB · Views: 1,979
-
2BC36034-6DB9-4536-AF96-AE8FBDD1A79E.jpeg108.7 KB · Views: 1,977
-
C5913775-5531-4C06-B9F3-83E894AE660C.jpeg102.5 KB · Views: 1,969
-
5F8A84CC-FEF3-4E71-AF96-C3D43E9D9E9A.jpeg288.1 KB · Views: 1,267
-
66B28038-6E93-4D08-8BDD-79DCFC59BA3E.jpeg257.8 KB · Views: 1,256
Last edited: