Fresh Shortblock, T56, Kooks Headers, HE ect ect ect....

NateDogg

Terminator
Established Member
Joined
Mar 3, 2013
Messages
2,596
Location
Wesley Chapel, FL
71295692_10102764857380932_8755470933759623168_n.jpg
71380219_10102764856178342_1333235780859985920_n.jpg
71295692_10102764857380932_8755470933759623168_n.jpg
71380219_10102764856178342_1333235780859985920_n.jpg
71035327_10102764856223252_6764504677233983488_n.jpg
70987804_10102764856372952_7256322425975996416_n.jpg
71204253_10102764856837022_8294337500827090944_n.jpg
71141214_10102764857211272_2665367347103006720_n.jpg
71295692_10102764857380932_8755470933759623168_n.jpg
Sold my car as a roller. Have alot of stuff i need to unload before i get my next one.

-fresh built in AUG. short block. Iron blocked .020. 9.7:1 weisco pistons with reliefs. Stock rods with arp2000s. Stock crank std/std. Arp side bolts, arp main bolts. Arp head studs. New oil pump with boundary billet gears. Stock oil pain included. SOLD

- 18x9 and 17x11 welds. R888s fronts Mickey s/s rears. 2300.

-COMP adjustable cam gear SOLD

- aluminator block. Needs .010 300

- Kooks headers. I'm not sure of the primary size but the collector is 2.5. SOLD

-DA and DB heads. Loaded with comp beehive springs/retainers. Will need gone through and clean up on one combustion chamber thingy. See picture 400

- T56 with 56k miles. Steeda short throw. 26spline input shaft. Bellhousing, crossmember and drive shaft SOLD

- stock (32) cam followers/rockers
Stock lash adjusters/lifters 275

- GT500 Lash adjusters brand new 250

-SOS gauge pod. Raptor shift light holder. Looks like it was repaired at some point. SOLD

- Team Z control arms BRAND NEW sold

-Gloss black lower intake manifold SOLD

- Intercooler SOLD

- after market heat exchanger WITH brackets sold

- heat exchanger hard lines SOLD

- Gloss black pulley bridge SOLD

- IC pump SOLD

- metco tensioner brace SOLD
 
Last edited:

NateDogg

Terminator
Established Member
Joined
Mar 3, 2013
Messages
2,596
Location
Wesley Chapel, FL
Heads have not been gone through. Cyclinder 8 broke a ring land and some material got into the combustion chamber.

This will need cleaned up. See picture

8a6a91af9e251f863a63046578de90c4.jpg
b9fe1761150841717c90266f342bb7af.jpg


Sent from my SM-G970U using Tapatalk
 

NateDogg

Terminator
Established Member
Joined
Mar 3, 2013
Messages
2,596
Location
Wesley Chapel, FL
Yes 1 3/4 primaries. Here are more pictures.

The have some dents but are in good working order!
b252cad1313cdbd4f2ab44ecedf6056e.jpg
92c7f470b44052c9b42e44df1990ccf0.jpg
50b0c75d7aaf08b90986e0bc7b310b1f.jpg
1e0b70f118e0777347548fd5049716d4.jpg


Sent from my SM-G970U using Tapatalk
 

NateDogg

Terminator
Established Member
Joined
Mar 3, 2013
Messages
2,596
Location
Wesley Chapel, FL
Transmission kit.

Comes with t56.26 spline. Drive shaft. Bell.housing. crossmember. Triax shortthrow.
03bbe4608e257cd41ce19573eccd3d1f.jpg
64ad1cc014cb88c28334d50347244781.jpg
be929b0ba614a0dcaa9af8aee0d4b9a1.jpg
b91cabeec31d4200e7c50d32d9e32c0d.jpg
023e38a36b5d61675bacce3093fab768.jpg
3d2f87d503b29ac0970a74bd0984e8f2.jpg


Sent from my SM-G970U using Tapatalk
 

NateDogg

Terminator
Established Member
Joined
Mar 3, 2013
Messages
2,596
Location
Wesley Chapel, FL
ARP head studs.

One of them is bent. All washers and nuts included.

You can buy a single stud from ARP.

75 SHIPPED.
fa43b46ffe96028f99c262ac2ed8ab22.jpg


Sent from my SM-G970U using Tapatalk
 

Wayneo

Well-Known Member
Established Member
Joined
Oct 10, 2003
Messages
1,583
Location
Horsham, PA
How was the Fitment with the welds? I know you been trying to sell them for alittle bit, Surprised they haven’t sold. Debating about selling my 18 afs wheels to pick these up.
 

NateDogg

Terminator
Established Member
Joined
Mar 3, 2013
Messages
2,596
Location
Wesley Chapel, FL
The fitment is great. They were intervention302s wheels. 18x9 big brake cut cut in the front and IRS fitment in the rear.

I think the massive rear tires scare alot of buyers away. I don't mind though. Eventually I'll have a running cobra and I'll still have these lol

Sent from my SM-G970U using Tapatalk
 
Last edited:

Deceptive

Muffin is my spirit animal
Established Member
Premium Member
Joined
Feb 10, 2011
Messages
13,562
Location
Nashville, TN
Bump for a great seller!

Thank you for the TVS Pulley.

Also, the head studs, are they ARP2000?


Sent from my iPhone using svtperformance.com
 

Wayneo

Well-Known Member
Established Member
Joined
Oct 10, 2003
Messages
1,583
Location
Horsham, PA
The fitment is great. They were innovation302s wheels. 18x9 big brake cut cut in the front and IRS fitment in the rear.

I think the massive rear tires scare alot of buyers away. I don't mind though. Eventually I'll have a running cobra and I'll still have these lol

Sent from my SM-G970U using Tapatalk
So why I debate about buying these and try to convince my wife before I sell my wheels now. How far are you willing to drive to meet? I’m in Doylestown pa.
 

NateDogg

Terminator
Established Member
Joined
Mar 3, 2013
Messages
2,596
Location
Wesley Chapel, FL
Well I might be driving to Harrisburg to pick up a hood sometime within the next 2 weeks. So if that goes through I could meet you there.

Sent from my SM-G970U using Tapatalk
 

Users who are viewing this thread



Top