Hello guys, long story short a few months ago i bought a 04 cobra with 111k on the clock, with exhaust, pully and some sct tuner.
i took the car to a local shop to get it tuned and at the same time to replace the oil and spark plugs.
I picked up the car and drove it home about 10 miles of driving it i noticed the temp gauge climing slowly... i was able to make it home, but when i pulled up the coolant was boiling and splashing out form the overflow bottle.
then i added some coolant but the car would overheat 5 minutes after driving it.
came back home let it cool off and then i burp the system, but this time i saw lil oil on the coolant i thought the head gasket right?
then i took the car to the shop to get it checked out, they replaced the coolant and the oil cooler 0ring since the test they did came back fine meaning the head gasket was fine, no coolant on oil, and no more oil in the coolant, but the engine keeps pulling air and the bubbles wont go away.
They said that when the engine builds pressure it doesnt do it like if the gasket was bad.
now they dont know what the hell is going on, and i dont either.
Any input, any ideas????.
Thanks in advance!
i took the car to a local shop to get it tuned and at the same time to replace the oil and spark plugs.
I picked up the car and drove it home about 10 miles of driving it i noticed the temp gauge climing slowly... i was able to make it home, but when i pulled up the coolant was boiling and splashing out form the overflow bottle.
then i added some coolant but the car would overheat 5 minutes after driving it.
came back home let it cool off and then i burp the system, but this time i saw lil oil on the coolant i thought the head gasket right?
then i took the car to the shop to get it checked out, they replaced the coolant and the oil cooler 0ring since the test they did came back fine meaning the head gasket was fine, no coolant on oil, and no more oil in the coolant, but the engine keeps pulling air and the bubbles wont go away.
They said that when the engine builds pressure it doesnt do it like if the gasket was bad.
now they dont know what the hell is going on, and i dont either.
Any input, any ideas????.
Thanks in advance!