Up for sale is an Eaton swap with Cobra Engineering M122 adapter plate, throttle cable bracket and dragon throttle body adapter.
Included in the sale are the following items:
1. Steigmier ported M122 with stock plenum elbow, hardware and 3.100 & 2.760 pulley
2. Cobra Engineering adapter plate, throttle cable bracket and dragon throttle body adapter and hardware
3. Lower intake plenum and hardware
4. Intercooler with intercooler adapter
5. Coolant crossover tube with hoses
6. Front timing cover
7. Pulley bridge with stock pulleys
8. Harmonic balancer with 6# metco lower
9. Upper and lower alternator brackets and hardware
10. Alternator
11. Oil filter adapter
12. 03/04 fuel rail with 39# injectors
13. Cobra maf
14. Heat exchanger with brackets and hoses
15. Intercooler pump with bracket
16. Miscellaneous vacuum hoses
17. Power steering reservoir with lines
18. Intercooler and coolant tanks
19. New throttle cable
20. New upper manifold gasket
21. Iat sensor
22. Cobra intake tube with filter
23. Billet flow idler pulleys
Does not include throttle body, but can include a VMP GT500 mechanical linkage throttle body and VMP plenum elbow and K&N cold air intake for and additional cost.
Price for items 1-23 is $2500 plus shipping and 3% PayPal fees.
I'm pretty sure I may be forgetting to list some parts. Pictures are below of items. Does not include Metco idler pulleys in picture.
Sent from my iPhone using Tapatalk
Included in the sale are the following items:
1. Steigmier ported M122 with stock plenum elbow, hardware and 3.100 & 2.760 pulley
2. Cobra Engineering adapter plate, throttle cable bracket and dragon throttle body adapter and hardware
3. Lower intake plenum and hardware
4. Intercooler with intercooler adapter
5. Coolant crossover tube with hoses
6. Front timing cover
7. Pulley bridge with stock pulleys
8. Harmonic balancer with 6# metco lower
9. Upper and lower alternator brackets and hardware
10. Alternator
11. Oil filter adapter
12. 03/04 fuel rail with 39# injectors
13. Cobra maf
14. Heat exchanger with brackets and hoses
15. Intercooler pump with bracket
16. Miscellaneous vacuum hoses
17. Power steering reservoir with lines
18. Intercooler and coolant tanks
19. New throttle cable
20. New upper manifold gasket
21. Iat sensor
22. Cobra intake tube with filter
23. Billet flow idler pulleys
Does not include throttle body, but can include a VMP GT500 mechanical linkage throttle body and VMP plenum elbow and K&N cold air intake for and additional cost.
Price for items 1-23 is $2500 plus shipping and 3% PayPal fees.
I'm pretty sure I may be forgetting to list some parts. Pictures are below of items. Does not include Metco idler pulleys in picture.
Sent from my iPhone using Tapatalk
