Hello SVT world. I have been collecting this stuff for the past 3 years to build my own Cobra motor with the high compression that i like. Took a lot of routes(i.e the 2 different internals) and this is all the stuff i ended up with. I'm selling everything I have, the parts list is way to long to list. I have everything you need to build a pretty badass 03 Cobra motor, besides injectors and better bearings. I was hoping to push 550 plus HP with the right set up. But life comes up so looking to hopefully sell to one person so I can see the end result but I know its not cheap
Major parts are:
Eaton Swap $3500
SVT rods w/ARP2000s and Mahle 12:1cr, 0cc Flat Tops. $1500
03 Cobra Crank .020M, .030R $350
03 Cobra Heads (DA) Fresh rebuild all new 32 valves, valve stem seals, and valve job $2000
03 Cobra Brakes $350
Teksid Block $350
Coyote Rods and Modmax 10.6:1, 0cc Flat tops
Of course I have many other parts but those are the main ones I have 2.5MB of pictures I can email to you if you want to see everything. Will not separate Eaton Swap
Sent from my [device_name] using the svtperformance.com mobile app
Major parts are:
Eaton Swap $3500
SVT rods w/ARP2000s and Mahle 12:1cr, 0cc Flat Tops. $1500
03 Cobra Crank .020M, .030R $350
03 Cobra Heads (DA) Fresh rebuild all new 32 valves, valve stem seals, and valve job $2000
03 Cobra Brakes $350
Teksid Block $350
Coyote Rods and Modmax 10.6:1, 0cc Flat tops
Of course I have many other parts but those are the main ones I have 2.5MB of pictures I can email to you if you want to see everything. Will not separate Eaton Swap
Sent from my [device_name] using the svtperformance.com mobile app