do any of you guys have an LFP/jdm e-fan with a different wire harness and if so what kind of harness, I have search on here but dont know were buy the harnesses that some of you are talking about or what they are called :shrug:
I have a JDM fan and when the controller quit working I went with Mad Enterprises. That was about a year ago and no problems yet.
http://www.madenterprise.com/F150.htm
Mike Dunn is probably the best customer service you will find. I was having a problem with my fan motor after I bought his controller. I called him up and he walked me through it for about an hour on a Saturday. Turns out my resistor was missing from my fan and it burned up my JDM controller.
on your Mad controller did it come with a some sort of temp prob that tell the fan to turn on, also do you have a manual switch on the controller
You can jump the relay on the controller/relay and not have to run another power source. He explains it in his instructions he sends with the kit. Very easy setup. I am 100% pleased with my MAD fan.
ohh ok what about the stock fan what needs to come out
I have a JDM fan and when the controller quit working I went with Mad Enterprises. That was about a year ago and no problems yet.
New Page 1
Mike Dunn is probably the best customer service you will find. I was having a problem with my fan motor after I bought his controller. I called him up and he walked me through it for about an hour on a Saturday. Turns out my resistor was missing from my fan and it burned up my JDM controller.
I'am wondering I have the flex a lite fans and I don't like the controller that it comes with bc I keep burning the fuses. i was wondering if the mad enterprises controller would work with my set up????