Dyno results A6 with nitrous

9secWS6

New Member
Established Member
Joined
Apr 30, 2013
Messages
278
Location
South Carolina
Slow at work today so I dynoed the ole coyote with my updated BBR tunes. It made 399/326 on motor and 576/492 on the 150hp shot(NX plate kit).
I also changed from my BBK CAI to a JLT and picked up 17rwhp on motor.

Sorry for the crappy pics

1622761_10202027493786523_1424356977_n.jpg


1558605_10202027482746247_1735874358_n.jpg
 
Last edited:

9secWS6

New Member
Established Member
Joined
Apr 30, 2013
Messages
278
Location
South Carolina
Great numbers on spray. But 326 TQ. I don't believe I had ever seen TQ that low on motor.
Im guessing it is as well, although I did fail to mention that ALL the runs were done on my nitrous tune. I did that for a accurate comparison on the CAI.
Also this was just a quick strap it down and make a couple of pulls kind of thing. Although I have a dyno at my disposal I am not a "dyno guy". I think it is a GREAT tuning tool but it is also a heartbreaker to a lot of people! The car runs decent numbers at the track and that's what is important to me personally.
 

JUIC3D

Boost Junkie
Established Member
Joined
Apr 24, 2011
Messages
2,551
Location
Florida
Strong power up top. No reason to hit the kit below 5000 unless you're trying to show off a peak torque number. Spraying it on the dyno where it counts---nicely done OP
 

SteveG@Lethal

Active Member
Established Member
Joined
Jun 17, 2011
Messages
3,145
Location
Florida
That what I'm talking about!!!

I see a high 9s in your future soon based on the conversation I just had with Chris!!!

"Your my boy blue!!"
 

Gray5.0

Member
Established Member
Joined
Jan 19, 2014
Messages
214
Location
Houston
My buddy has a few more mods and put down a little more power but all in all good numbers. Have to get some tires to help you grab so you can hit those 9s. I blew his tires off at the track the other night. Wasn't on a drag radial but had some softer tires on his alcoas.
 

Users who are viewing this thread



Top