I still have the stock blower a Eaton m90. It is ported with a smaller pully. Took it,to get tuned today. We did 6 or 8 pulls tuning normal driving conditions, then 3 wot pulls. It was an hour drive to the shop.and the car went straight onto the dyno. Shop temp was 91 degrees. With all of that said my car was heat soaked by the time we did the wot pulls. IAT was about 145/150. My numbers are terrible. 330rwhp/350lbft. Tuner said if shop temp was 70 and he let the car cool before the pulls that it would do much better, around 350 to 360. My goal is 400rwhp. We decided that if I add LTs and a dry 35 shot it should put me there. Any advice or comments would helpful. Trying to get there without changing out the blower. I think it makes your car appear to be a clone, or that it started out as a n/a car.
Sent from my HTC Glacier using Tapatalk 2
Sent from my HTC Glacier using Tapatalk 2
Last edited: